ON ITS WAY

[chocobot offline]

i just ordered a manoi ....what tips do i need to build it?

choco

[lampcov offline]

Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc

[chocobot offline]

Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc

THANKS

[chocobot offline]

it should be in my hands tomorrow

[Orac offline]

Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

[chocobot offline]

Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

[tempusmaster offline]

Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.

[chocobot offline]

Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.

thanks

[Orac offline]

http://robosavvy.com/forum/viewtopic.ph ... ight=#7505

My post is near the bottom of the thread above