Futaba Robot in the pictures over at Robots-Dreams
Futaba Robot in the pictures over at Robots-Dreams
by cdraptor
Mon Jan 14, 2008 9:27 pm
Okay, so was wondering if anyone had any info on this. Check out www.robots-dreams.com the Robot Carnival, there is a grey robot Futaba based - using what looks like many RBT-1 plastic parts. Anyway was wondering if that was a home built? Curious if anyone knows any details about it.
Re: Futaba Robot in the pictures over at Robots-Dreams
by tempusmaster
Thu Jan 17, 2008 2:35 pm
cdraptor wrote:Okay, so was wondering if anyone had any info on this. Check out www.robots-dreams.com the Robot Carnival, there is a grey robot Futaba based - using what looks like many RBT-1 plastic parts. Anyway was wondering if that was a home built? Curious if anyone knows any details about it.
Basically, it's a HPI G-Robot, identical to the RBT-1.
Latest robot news, information, reviews, hacks, photos, and videos - with special on-site coverage from Japan
http://www.robots-dreams.com
http://www.robots-dreams.com
by tom_chang79
Mon Jan 21, 2008 4:55 pm
The one in the picture has a much cooler head IMO... The default one looks goofy...
by cdraptor
Mon Jan 21, 2008 10:25 pm
They also modified the Arm configuration. If you look at the RBT-1 or the G-Robot the arms move forward / backward like doing a curl, this one has been modified so they swing in/out from the body. Looks a bit more streamlined with the chest plate from removed and the Head is cool, do they have the leds connected in the head behind the eyes. Cannot tell from the picture
by C.U.E
Fri Mar 28, 2008 2:56 pm
the white robot is "ff" built by Katsu-san.
he modefy G-ROBOT.
he wrote in his Blog:
･The lower half of the body is normal G Robot's .
(However, the clutch is invalidated. )
･Servos in upper-body changes to the high torque servo(RS301CR)
・Chest frame is inverted to use neck joint as a joint to twist the body.
・move arm to swing in/out as cdrapter wrote
・weight：975g
bellow URL is his blog, but sorry, japanese only.
http://katsu.co-neko.com/
he modefy G-ROBOT.
he wrote in his Blog:
･The lower half of the body is normal G Robot's .
(However, the clutch is invalidated. )
･Servos in upper-body changes to the high torque servo(RS301CR)
・Chest frame is inverted to use neck joint as a joint to twist the body.
・move arm to swing in/out as cdrapter wrote
・weight：975g
bellow URL is his blog, but sorry, japanese only.
http://katsu.co-neko.com/
Re: Futaba Robot in the pictures over at Robots-Dreams
by limor
Fri Mar 28, 2008 4:25 pm
tempusmaster wrote:cdraptor wrote:Okay, so was wondering if anyone had any info on this. Check out www.robots-dreams.com the Robot Carnival, there is a grey robot Futaba based - using what looks like many RBT-1 plastic parts. Anyway was wondering if that was a home built? Curious if anyone knows any details about it.
Basically, it's a HPI G-Robot, identical to the RBT-1.
does look cooler than the original black color..
