Servo Upgrade Options

[jaybirdtke offline]

I have not tested any of the following servos in my RoboPhilo. This is simply a list of similar size servos that might make good replacements.

DIGITAL SERVOS From Tower Hobbies @ 6.0V
Cost ---- Model --- Spd -- Torq
$40.00 - TS-150 - 0.21 - 14.0 - BB - MG
$45.00 - TS-160 - 0.14 - 9.43 - BB - MG

COMPARE TO ROBONOVA - HSR-8498HB @ 6.0V
Cost ---- Model --- Spd -- Torq
$79.00 - 8498HB- 0.20 - 7.40

COMPARE TO KHR-2HV - KRS-788HV @ 10.8V
Cost ---- Model --- Spd -- Torq
$53.79 - 788-HV - 0.14 - 10.0

STANDARD SERVOS
Cost ---- Model --- Spd -- Torq
$12.50 - SV4032 - 0.19 - 4.10
$25.00 - SV4140 - 0.16 - 6.50
$25.00 - S3010 --- 0.16 - 6.50
$35.00 - S3305 --- 0.20 - 8.90 - BB - MG
$35.00 - TS-70MG- 0.20 - 9.60 - BB - MG

[trey3670 offline]

I did get the 3003 to work as well as a s9203 metal gear.

[jaybirdtke offline]

Replacement servo gears for the SV4032 and SV4140 are now available on the robobrothers website.

[ozzy69 offline]

so has anyone upgraded the servos yet? if you did which servos did you use and did it make a difference?

[jaybirdtke offline]

I ordered the SV4140 upgrade servo kit for the hip servos but they have not yet arrived. I'll keep you posted. I hope he will be able to balance on one leg and lift the other leg to a 90 degree position using only the hip servo.

[Baccman offline]

Do the parts also have to come from China, or do robobrothers stock in CA?

[jaybirdtke offline]

That's a good question. I placed my order a little over a week ago, and have yet to receive even a confirmation that it has shipped.

[jaybirdtke offline]

I received my SV4140 upgrade kit on Friday and just got around to installing them along with the replacement head turn servo. I used the gears from one of the original hip servos to replace the ones in the shoulder that I stripped. While doing so I noticed I had stripped the gears in one of the SV4130 hip servos. So now his only upgrades are the hip servos to SV4140's and it makes a big difference. If you have a RoboPhilo I highly recommend upgrading at least the hip servos. One of the major selling points to this bot is the low cost so I don't think I'll be upgrading many more servos, but only time will tell. Going from the SV4130 to the SV4140 did make a noticable difference.