MechRC issue with Windows 7 - Solved

From the creative team behind RealRobots' Cybot and Hasbro's Interactive R2D2 comes - MechRC - a programmable British design humanoid robot for the masses
2 postsPage 1 of 1
2 postsPage 1 of 1

MechRC issue with Windows 7 - Solved

Post by limor » Mon Apr 12, 2010 12:26 pm

Post by limor
Mon Apr 12, 2010 12:26 pm

there is an issue that the MechRC software & USB dongle installation packages as supplied on the CD do not support Windows 7 64bit.

Issue: The MechRC Commander software installation will not complete.

Solution: Open this link: http://www.mechrc.com/downloads/mechrc.zip

Then open the zip file (if it does not open automatically) and double click the mechrc.reg file inside it to add the required entries into the computer’s registry (click ‘yes’ when prompted). Then install the MechRC Commander Software installation package from the CD.

Issue: The USB dongle does not have an associated COM port available in the MechRC Commander software when plugged in.

Solution: Download the latest version of the USB dongle driver installation file:

http://www.mechrc.com/downloads/USB_Setup_v110.exe

Double click the file to install the latest drivers on the machine (following all on screen installation prompts). Restart the MechRC Commander software.
there is an issue that the MechRC software & USB dongle installation packages as supplied on the CD do not support Windows 7 64bit.

Issue: The MechRC Commander software installation will not complete.

Solution: Open this link: http://www.mechrc.com/downloads/mechrc.zip

Then open the zip file (if it does not open automatically) and double click the mechrc.reg file inside it to add the required entries into the computer’s registry (click ‘yes’ when prompted). Then install the MechRC Commander Software installation package from the CD.

Issue: The USB dongle does not have an associated COM port available in the MechRC Commander software when plugged in.

Solution: Download the latest version of the USB dongle driver installation file:

http://www.mechrc.com/downloads/USB_Setup_v110.exe

Double click the file to install the latest drivers on the machine (following all on screen installation prompts). Restart the MechRC Commander software.
limor offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 1845
Joined: Mon Oct 11, 2004 1:00 am
Location: London, UK

Re: MechRC issue with Windows 7 - Solved

Post by bor » Tue Feb 04, 2014 8:15 pm

Post by bor
Tue Feb 04, 2014 8:15 pm

Hi,
www.mechrc.com does not exist any more. Is there any other palce where I can get the reg file and driver to run mechrc commander under windows 7?
Thanks,
Bor
Hi,
www.mechrc.com does not exist any more. Is there any other palce where I can get the reg file and driver to run mechrc commander under windows 7?
Thanks,
Bor
bor offline
Newbie
Newbie
Posts: 1
Joined: Tue Feb 04, 2014 8:07 pm


2 postsPage 1 of 1
2 postsPage 1 of 1
cron