roboard-rm-g212-thermal-array-sensor I2C not communicating

[karan_maverick offline]

i2cmaster.zip

I2C Master

(23.01 KiB) Downloaded 925 times

For thermal image acquisition I bought 2 RoBoard RM G-212. I am facing the following issues with the sensor:

1). The sensor is not communicating over the I2C protocol with the Arduino Nano microcomputer. I have tried compiling the attached code but have been unsuccessful so far. The error seems to be due to the i2cmaster.S file which is the assembler file. if I delete the file the code compiles successfully and we don't get the output on the serial monitor.

Error:-

i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_init'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:94: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_start'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:113: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_start_wait'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:157: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_rep_start'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:132: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_stop'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:181: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_write'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:202: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_readAck'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:261: first defined here
i2cmaster\twimaster.c.o: In function `i2c_init':
C:\Program Files (x86)\Arduino\libraries\i2cmaster/twimaster.c:31: multiple definition of `i2c_readNak'
i2cmaster\i2cmaster.S.o:C:\Program Files (x86)\Arduino\libraries\i2cmaster/i2cmaster.S:258: first defined here
collect2.exe: error: ld returned 1 exit status
Error compiling.

2). The RoBoard Sensor/ Melexis MLX 90620 is not recognized by Raspberry Pi2. Perhaps it is the driver issue or I2C incompatibility.

Please advise.

Best regards,

Karan Behar

[limor]

Have you manage to solve the problem ?