havimo2 camera not found

[nyoo offline]

Prof. Hamid, I have a camera havimo2 can not display images, a warning is displayed only camera not found .... whether my camera is damaged or needs reset? if you want to reset how?
power supply is mounted well and also the data cable is installed correctly .... help me .. help me ..

[Karo offline]

Did you solve this problem?
I have the same problem

[hmlroberto offline]

Hi I'm working with havimo 1.5 and I had the same problem, I resolved it reseting the havimo's software using hamivo GUI. To reset your havimo open havimo GUI and select the tab of camera settings there is a button with the option reset factory settings and that's all. Here you are an example (obviously you need connect your module vision)





Here you are the image with a best resolution: http://imageshack.us/a/img259/1826/configuracionokversionf.png

You can download havimo GUI here: http://sourceforge.net/projects/havimo/

I hope that this information can help you


Greettings from México,
Robert

[smallertree offline]

Prof. Hamid, I try your way to resolve but I still have this question. Can you help me what can I do?
https://lh5.googleusercontent.com/-r-iMxuqOUQQ/UI_hskjbVgI/AAAAAAAAAFA/kb_7iLrLsd0/w497-h389-p-k/123.bmp

[hamid_m offline]

Hi smallertree,

As I see in the image you attached, the module can communicate with the GUI. else you would get a "no ping response". but a Camera not found, could have two reasons:
- The camera chip is not connected properly (check the flex cable)
- or It is damaged.

Best regards,
Hamid.