RoboSavvy Forum

ON ITS WAY

2007-04-12T00:22:11+01:00

http://robosavvy.com/forum/viewtopic.ph ... ight=#7505

My post is near the bottom of the thread above

Statistics: Posted by Orac — Thu Apr 12, 2007 12:22 am

ON ITS WAY

2007-04-11T22:46:38+01:00

tempusmaster wrote:
chocobot wrote:
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.

thanks

Statistics: Posted by chocobot — Wed Apr 11, 2007 10:46 pm

ON ITS WAY

2007-04-11T22:31:45+01:00

chocobot wrote:
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.

Statistics: Posted by tempusmaster — Wed Apr 11, 2007 10:31 pm

ON ITS WAY

2007-04-10T20:27:24+01:00

Orac wrote:
Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

Statistics: Posted by chocobot — Tue Apr 10, 2007 8:27 pm

ON ITS WAY

2007-04-10T19:50:39+01:00

Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.

Statistics: Posted by Orac — Tue Apr 10, 2007 7:50 pm

ON ITS WAY

2007-04-10T18:20:29+01:00

it should be in my hands tomorrow

Statistics: Posted by chocobot — Tue Apr 10, 2007 6:20 pm

ON ITS WAY

2007-04-09T23:46:30+01:00

lampcov wrote:
Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc

THANKS

Statistics: Posted by chocobot — Mon Apr 09, 2007 11:46 pm

ON ITS WAY

2007-04-09T23:33:49+01:00

Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc

Statistics: Posted by lampcov — Mon Apr 09, 2007 11:33 pm

ON ITS WAY

2007-04-09T21:05:00+01:00

i just ordered a manoi ....what tips do i need to build it?

choco

Statistics: Posted by chocobot — Mon Apr 09, 2007 9:05 pm