RoboSavvy Forum

Re: Futaba Robot in the pictures over at Robots-Dreams

2008-03-28T16:25:56+01:00

tempusmaster wrote:
cdraptor wrote:Okay, so was wondering if anyone had any info on this. Check out www.robots-dreams.com the Robot Carnival, there is a grey robot Futaba based - using what looks like many RBT-1 plastic parts. Anyway was wondering if that was a home built? Curious if anyone knows any details about it.

Basically, it's a HPI G-Robot, identical to the RBT-1.

does look cooler than the original black color..

Statistics: Posted by limor — Fri Mar 28, 2008 4:25 pm

Futaba Robot in the pictures over at Robots-Dreams

2008-03-28T14:56:22+01:00

the white robot is "ff" built by Katsu-san.
he modefy G-ROBOT.

he wrote in his Blog:

･The lower half of the body is normal G Robot's .
(However, the clutch is invalidated. )
･Servos in upper-body changes to the high torque servo(RS301CR)
・Chest frame is inverted to use neck joint as a joint to twist the body.
・move arm to swing in/out as cdrapter wrote
・weight：975g

bellow URL is his blog, but sorry, japanese only.
http://katsu.co-neko.com/

Statistics: Posted by C.U.E — Fri Mar 28, 2008 2:56 pm

Futaba Robot in the pictures over at Robots-Dreams

2008-01-21T22:25:58+01:00

They also modified the Arm configuration. If you look at the RBT-1 or the G-Robot the arms move forward / backward like doing a curl, this one has been modified so they swing in/out from the body. Looks a bit more streamlined with the chest plate from removed and the Head is cool, do they have the leds connected in the head behind the eyes. Cannot tell from the picture

Statistics: Posted by cdraptor — Mon Jan 21, 2008 10:25 pm

Futaba Robot in the pictures over at Robots-Dreams

2008-01-21T16:55:21+01:00

The one in the picture has a much cooler head IMO... The default one looks goofy...

Statistics: Posted by tom_chang79 — Mon Jan 21, 2008 4:55 pm

Re: Futaba Robot in the pictures over at Robots-Dreams

2008-01-17T14:35:03+01:00

cdraptor wrote:
Okay, so was wondering if anyone had any info on this. Check out www.robots-dreams.com the Robot Carnival, there is a grey robot Futaba based - using what looks like many RBT-1 plastic parts. Anyway was wondering if that was a home built? Curious if anyone knows any details about it.

Basically, it's a HPI G-Robot, identical to the RBT-1.

Statistics: Posted by tempusmaster — Thu Jan 17, 2008 2:35 pm

Futaba Robot in the pictures over at Robots-Dreams

2008-01-14T21:27:24+01:00

Okay, so was wondering if anyone had any info on this. Check out www.robots-dreams.com the Robot Carnival, there is a grey robot Futaba based - using what looks like many RBT-1 plastic parts. Anyway was wondering if that was a home built? Curious if anyone knows any details about it.

Statistics: Posted by cdraptor — Mon Jan 14, 2008 9:27 pm