RoboSavvy Forum

Servo Upgrade Options

2008-02-10T04:55:51+01:00

I received my SV4140 upgrade kit on Friday and just got around to installing them along with the replacement head turn servo. I used the gears from one of the original hip servos to replace the ones in the shoulder that I stripped. While doing so I noticed I had stripped the gears in one of the SV4130 hip servos. So now his only upgrades are the hip servos to SV4140's and it makes a big difference. If you have a RoboPhilo I highly recommend upgrading at least the hip servos. One of the major selling points to this bot is the low cost so I don't think I'll be upgrading many more servos, but only time will tell. Going from the SV4130 to the SV4140 did make a noticable difference.

Statistics: Posted by jaybirdtke — Sun Feb 10, 2008 4:55 am

Servo Upgrade Options

2008-02-06T23:54:18+01:00

That's a good question. I placed my order a little over a week ago, and have yet to receive even a confirmation that it has shipped.

Statistics: Posted by jaybirdtke — Wed Feb 06, 2008 11:54 pm

Servo Upgrade Options

2008-02-05T03:48:45+01:00

Do the parts also have to come from China, or do robobrothers stock in CA?

Statistics: Posted by Baccman — Tue Feb 05, 2008 3:48 am

Servo Upgrade Options

2008-02-04T23:42:05+01:00

I ordered the SV4140 upgrade servo kit for the hip servos but they have not yet arrived. I'll keep you posted. I hope he will be able to balance on one leg and lift the other leg to a 90 degree position using only the hip servo.

Statistics: Posted by jaybirdtke — Mon Feb 04, 2008 11:42 pm

Servo Upgrade Options

2008-02-04T22:22:26+01:00

so has anyone upgraded the servos yet? if you did which servos did you use and did it make a difference?

Statistics: Posted by ozzy69 — Mon Feb 04, 2008 10:22 pm

Servo Upgrade Options

2008-01-30T23:06:52+01:00

Replacement servo gears for the SV4032 and SV4140 are now available on the robobrothers website.

Statistics: Posted by jaybirdtke — Wed Jan 30, 2008 11:06 pm

Servo Upgrade Options

2008-01-21T20:04:35+01:00

I did get the 3003 to work as well as a s9203 metal gear.

Statistics: Posted by trey3670 — Mon Jan 21, 2008 8:04 pm

Servo Upgrade Options

2008-01-21T04:43:43+01:00

I have not tested any of the following servos in my RoboPhilo. This is simply a list of similar size servos that might make good replacements.

DIGITAL SERVOS From Tower Hobbies @ 6.0V
Cost ---- Model --- Spd -- Torq
$40.00 - TS-150 - 0.21 - 14.0 - BB - MG
$45.00 - TS-160 - 0.14 - 9.43 - BB - MG

COMPARE TO ROBONOVA - HSR-8498HB @ 6.0V
Cost ---- Model --- Spd -- Torq
$79.00 - 8498HB- 0.20 - 7.40

COMPARE TO KHR-2HV - KRS-788HV @ 10.8V
Cost ---- Model --- Spd -- Torq
$53.79 - 788-HV - 0.14 - 10.0

STANDARD SERVOS
Cost ---- Model --- Spd -- Torq
$12.50 - SV4032 - 0.19 - 4.10
$25.00 - SV4140 - 0.16 - 6.50
$25.00 - S3010 --- 0.16 - 6.50
$35.00 - S3305 --- 0.20 - 8.90 - BB - MG
$35.00 - TS-70MG- 0.20 - 9.60 - BB - MG

Statistics: Posted by jaybirdtke — Mon Jan 21, 2008 4:43 am