There are two Robobuilders that have clear motors. the 5720T which has 100% clear motors and RQ-HUNO which has partially clear motors, so it'd be great if you could let us know exactly which model you have.
In any case, the error you're seeing may be cause by having incorrect setting in MotionBuilder.
If your Robot is a 5720T, in MotionBuilder, you need to set the project platform to Creator HUNO and develop your motions.
Also make sure you are using only the default 16 servos.
if you have an RQ-HUNO, you need to set the platform in MotionBuilder accordingly as well.
If you try to run a Motion that's been created for an incorrect platform in MotionBuilder you'll get that error.Statistics: Posted by PedroR — Mon Dec 10, 2012 1:13 pm
]]>