RoboSavvy Forum

Error 0078

2010-03-05T03:02:21+01:00

Tsai Sung Yang wrote:
The error happens on onboard conenctor(J3), and no error on external one(J4). 12V is what I use. It's weird.

The onboard connector may not match your USB stick well. You may try other USB sticks to see whether this problem still occurs on the onboard USB connector:)

PS: If you live in Taiwan, there is a Chinese forum for RoBoard:
http://www.robofun.net/forum/forumdisplay.php?fid=89
and you find there some RoBoard players who may not be familiar with English, but are very pleased to answer your any problems:)

Statistics: Posted by roboard — Fri Mar 05, 2010 3:02 am

Error 0078

2010-02-03T07:44:19+01:00

The error happens on onboard conenctor(J3), and no error on external one(J4). 12V is what I use. It's weird.

roboard wrote:
sounds queer, there should be working anytime, can you try plug your 8G to onbaord USB conenctor NOT external one, and also check the power input (just in case the power is not enough in boot up) :--)

Statistics: Posted by Tsai Sung Yang — Wed Feb 03, 2010 7:44 am

Error 0078

2010-03-05T02:53:06+01:00

In theory, there should be working anytime. You may try plugging your 8G to the onbaord USB conenctor (NOT external one), and also check the power input (just in case the power is not enough in boot up) :--)

Statistics: Posted by roboard — Wed Feb 03, 2010 1:57 am

Error 0078

2010-02-02T06:33:26+01:00

Just an USB 8G stick

roboard wrote:
what USB device you plugged

Statistics: Posted by Tsai Sung Yang — Tue Feb 02, 2010 6:33 am

Error 0078

2010-02-02T02:43:04+01:00

what USB device you plugged

Statistics: Posted by roboard — Tue Feb 02, 2010 2:43 am

Error 0078

2010-02-01T09:24:57+01:00

Every time I start Roboard, there is an error 0078 occured. Reboot is okay.
I think it because USB is pluging on the board.
Is there any solution to avoid error 0078 even I plug the USB before booting?

Statistics: Posted by Tsai Sung Yang — Mon Feb 01, 2010 9:24 am