RoboSavvy Forum

Need help installing tv tuner driver in ubuntu 9.04

2010-11-28T22:34:45+01:00

don't know what to enable to actually make it work. Or maybe I just need to set the default options... I have no clue for the moment and since it take 3-5 hours to compile it will take me ages to find the correct options (my robot competition is in 2 months and a half).

صور

Statistics: Posted by nishi59 — Sun Nov 28, 2010 10:34 pm

Need help installing tv tuner driver in ubuntu 9.04

2010-11-02T18:53:30+01:00

Just to mention that I didn't do anything more. It just happened that sometime later the v4l-driver created a symbolic link from /dev/v4l-dvb/[camera] to /dev/video0.

I don't know why it didnt work right away but now it's working fine.

Statistics: Posted by Ernif — Tue Nov 02, 2010 6:53 pm

Need help installing tv tuner driver in ubuntu 9.04

2010-10-31T18:16:14+01:00

It's great you got your camera working!

Could you post some information about what you did to get it to work, to help out anyone else who has a similar problem in the future? That would be a great help.

Statistics: Posted by andrewmerrill — Sun Oct 31, 2010 6:16 pm

Need help installing tv tuner driver in ubuntu 9.04

2010-10-30T21:51:33+01:00

Everything working fine now! Thanks a lot.

Statistics: Posted by Ernif — Sat Oct 30, 2010 9:51 pm

Need help installing tv tuner driver in ubuntu 9.04

2010-10-27T18:37:08+01:00

Posting result:

Actually it DID compile, thanks a lot, but after when I try to install the driver I need using modprobe:

modprobe em28xx

It says that it doesn't recognize the module em28xx.

So... I'm working on it!

Statistics: Posted by Ernif — Wed Oct 27, 2010 6:37 pm

Need help installing tv tuner driver in ubuntu 9.04

2010-10-26T14:31:55+01:00

Thanks for the quick reply, sounds like exactly what I need. I'll be trying this tonight and post the result!

Statistics: Posted by Ernif — Tue Oct 26, 2010 2:31 pm

Need help installing tv tuner driver in ubuntu 9.04

2010-10-26T06:12:48+01:00

I'm assuming you installed the vortex kernel headers package, probably with a command like this:

Code:: dpkg -i linux-headers-2.6.34.1-vortex86-sg_1.0_i386.deb

Unfortunately, this package does not create a needed link that the v4l build process is looking for. To create the missing link yourself, enter these commands (as root):

Code:: cd /lib/modules/2.6.34.1-vortex86-sg ln -s /usr/src/linux-headers-2.6.34.1-vortex86-sg build

This creates a symbolic link (called 'build') from the kernel headers that you installed into the /lib/modules subdirectory for the current kernel version.

It looks like you already know what you're doing with regard to building the v4l-dvb driver. In case anyone who isn't sure what to do is reading this, here are the steps I used to download and install it:

Code:: cd /usr/local/src wget http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.gz tar xzf tip.tar.gz cd v4l-dvb-1da5fed5c8b2 make all make install modprobe uvcvideo

After doing this, I was able to use uvc based webcams (including a Logitech c500 and Logitech Pro 9000) directly from the RoBoard.

One note - I'm running Debian 5 (lenny) on my Roboard, and I have not tested any of these instructions with other linux distros.

Andrew

Statistics: Posted by andrewmerrill — Tue Oct 26, 2010 6:12 am

Need help installing tv tuner driver in ubuntu 9.04

2010-10-26T05:25:29+01:00

I'm trying to install the v4l-dvb driver that is suppose to make my hauppage tv tuner working, but when I try to compile it I get the following error:

---------------------------------------------------------------------------------
root@machine:/home/temp/v4l-dvb# make
make -C /home/temp/v4l-dvb/v4l
make[1]: Entering directory `/home/temp/v4l-dvb/v4l'
Updating/Creating .config
Preparing to compile for kernel version 2.6.34
File not found: /lib/modules/2.6.34.1-vortex86-sg/build/.config at ./scripts/mak
e_kconfig.pl line 32, line 4.
make[1]: *** No rule to make target `.myconfig', needed by `config-compat.h'. S
top.
make[1]: Leaving directory `/home/temp/v4l-dvb/v4l'
make: *** [all] Error 2
root@machine:/home/temp/v4l-dvb#
----------------------------------------------------------------------------------

I've been reading this forum and googling and I think I must recompile the kernel but there is so many options in the menuconfig that I don't know what to enable to actually make it work. Or maybe I just need to set the default options... I have no clue for the moment and since it take 3-5 hours to compile it will take me ages to find the correct options (my robot competition is in 2 months and a half).

Any idea?

Statistics: Posted by Ernif — Tue Oct 26, 2010 5:25 am