RoboSavvy Forum

rb110 Lan problem

2011-02-08T02:41:48+01:00

hi,

please enter the BIOS of roboard.

go to the "Advanced" item, and look for "MAC Address".

if the Mac address is ff ff ff ff ff ff, please send a mail to info@roboard.com.

Statistics: Posted by roboard — Tue Feb 08, 2011 2:41 am

rb110 Lan problem

2011-02-05T16:19:03+01:00

JavaRN wrote:
Is the connection through a hub/switch or is it a direct connection, because if it is a direct connection you have to use a cross-linked cable and set the IP settings accordingly.

i have used direct connection before via two laptops and had set the IP's! and worked well!
but with my laptop and rb110 its not possible
they connect to eachother! but when i ping the other one, i get no packet in response!

also the driver is successfully installed!
and the workgroup is set to WORKGROUP in both!

is it beacause of the LAN port? how can i test it?!

Statistics: Posted by robaldo — Sat Feb 05, 2011 4:19 pm

rb110 Lan problem

2011-02-05T11:59:26+01:00

Is the connection through a hub/switch or is it a direct connection, because if it is a direct connection you have to use a cross-linked cable and set the IP settings accordingly.

Statistics: Posted by JavaRN — Sat Feb 05, 2011 11:59 am

rb110 Lan problem

2011-02-04T20:56:54+01:00

No idea?

Statistics: Posted by robaldo — Fri Feb 04, 2011 8:56 pm

rb110 Lan problem

2011-02-04T07:10:00+01:00

Hi all
i am using rb-110 and i have used wireless connection without any problem!
but now i need to use LAN!
but there is a problem with it!
all the drivers are OK but i can't ping other computer which is connected via LAN cable connection!
does any body know how to solve this problem?
thanks

Statistics: Posted by robaldo — Fri Feb 04, 2011 7:10 am