RoboSavvy Forum

Re:

2013-10-04T06:46:36+01:00

PedroR wrote:
Hi Tom

Firstly, is the eBox booting correctly?

The LED is used only for status purposes.

If the box is working correctly, there could be a couple of causes for the change in colours (for example flashing a new BIOS or changing the boot device) but this would seem more of a cosmetic nature.

If I recall correctly the color you see is a combination of 2 led light that are on the motherboard; I believe there's a read and a blue one and then there's an acrylic part that breaks the colors out to the front panel.
When you see purple, it means Red+Blue are on.

I don't know what the Blue and Red mean individually (maybe the manual will help) but if the eBox is working fine I would not worry much.

It is OK to open the box and have a look around if you're curious; we'd just recommend being careful when doing (and putting it back together) and to _not_ try and remove the CMOS battery (the clip usually gets damaged and won't ever fit properly again).

Regards
Pedro

Thanks for sharing information.. Even I was worried about flickering led lights and your post helped me lot.. Thanks again

Statistics: Posted by JanGlover — Fri Oct 04, 2013 6:46 am

Ebox 3350mx led

2013-06-17T13:40:33+01:00

Thanks for the reply pedro. I've changed nothing and its working just fine, was curious that's all. When I get a second ill check the manual to see if I can shed some light on what the different colours mean.

Statistics: Posted by b2051758 — Mon Jun 17, 2013 1:40 pm

Ebox 3350mx led

2013-06-17T14:09:58+01:00

Hi Tom

Firstly, is the eBox booting correctly?

The LED is used only for status purposes.

If the box is working correctly, there could be a couple of causes for the change in colours (for example flashing a new BIOS or changing the boot device) but this would seem more of a cosmetic nature.

If I recall correctly the color you see is a combination of 2 LEDs that are on the motherboard; I believe there's a read and a blue one and then there's an acrylic part that breaks the colors out to the front panel.
When you see purple, it means Red+Blue are on.

I don't know what the Blue and Red mean individually (maybe the manual will help) but if the eBox is working fine I would not worry much.

It is OK to open the box and have a look around if you're curious; we'd just recommend being careful when doing (and putting it back together) and to _not_ try and remove the CMOS battery (the clip usually gets damaged and won't ever fit properly again).

Regards
Pedro

Statistics: Posted by PedroR — Mon Jun 17, 2013 10:52 am

Ebox 3350mx led

2013-06-16T15:19:15+01:00

Hi quick question,

Upon booting up my ebox this morning the led lights were flickering red. Normally this is a purple colour. Is this normal? Just never seen red lights when it's been booting up before

Tom.

Statistics: Posted by b2051758 — Sun Jun 16, 2013 3:19 pm