RoboSavvy Forum

Kondo KRC-3 AD Remote Control

2008-07-19T09:18:29+01:00

thanks for your answer.
It's work for me.
the problem was that in the HTH3 in the option menu I enable ' playing motion thought the sender' and 'control trough KRC-1' but you don't have enable the second with the krr1.

Now my remote control work well and my khr2 walk in all my room easily with no cable.GREAT

Stevken you have to plug in the CH3 on the KRR-1 and on the lower speed port on the RCB (at the right of the high speed port)

Did someone have English motion for the controller because I use them on the CD ( they work well) but I can't understand which is writing on different POS in the motion shit.
SO if any one have a link to download them in English or for other funny motion it was cool.
I am going to add a accelerometer to my KHR....

Thanks a lot Have a greet week end

Statistics: Posted by oroboros — Sat Jul 19, 2008 9:18 am

Kondo KRC-3 AD Remote Control

2008-07-19T02:32:25+01:00

Hello,

What are the correct port settings for the KRR-1? I think that may be the problem I am having with mine.

Thanks

Statistics: Posted by Stevken — Sat Jul 19, 2008 2:32 am

Kondo KRC-3 AD Remote Control

2008-07-18T02:49:34+01:00

1) Open Heart2Heart
2) Open the Options dialogue and enable KRC-1 control
3) Also enable 'Playing motion through the sender'
4) Close dialogue
5) Read the data table from the RCB-3J/robot
6) Choose any move (eg. 'walk forward')
7) Double-click to open the move dialogue
Turn on my KRC-3 remote and hold down the forward stick
9) Click 'Reception' in the move dialogue
10) The number should change from 65535 to 1

Statistics: Posted by RKM83 — Fri Jul 18, 2008 2:49 am

Kondo KRC-3 AD Remote Control

2008-07-17T21:46:00+01:00

Dear all,
I have a little problem with my new remote control:
Kondo KRC-3 AD Remote Control
http://www.trossenrobotics.com/kondo-krc-3-ad-remote-control.aspx

I have my KHR-2HV since Friday I build it and make all setting the CD motion works well so I tried to use the remote control.

I found an English manual but it doesn't work.
http://www.ixs.co.jp/download/manual/KRC-3ADEnglish.pdf

First I plug the KRR-1 receiver on the RCB-3J on the low speed serial port Did I plug RCB-3J low speed to KRR-1 Bat or any channel?

Did KRR-1 must be power or plug into an over port?

I don’t understand when I tried to assign a button to a motion by clicking on receive the value doesn’t change.

Did someone have a link to a tutorial???
Thanks a lot for any help.
Sorry for my pour English I am French.

Have a nice day.

Statistics: Posted by oroboros — Thu Jul 17, 2008 9:46 pm