RoboSavvy Forum

KHR-3HV announcement from Kondo

2009-07-23T17:17:34+01:00

Robosavvy has now started pre sales for KHR 3HV.

The page is here with further details on the Robot and Accessories
http://robosavvy.com/store/product_info ... cts_id/554

Robots pre-ordered until next week should be delivered in the second half of August.

Also note the supply of KHR 3HV is very limited in Japan. We were able to place a reservation on a small number of units for Europe so if you're interested please go ahead and order yours

Additional Info:
We're offering the KRI-3 interface board with the first purchases of KHR 3HV.
KRI-3 is an interface board necessary to connect Radio Control units form Kondo to KHR 3HV (such as KRC-3AD).
Please note KHR 3HV is also compatible with KRG 3 and RAS 2 so it's .

Regards
Pedro.

Statistics: Posted by PedroR — Thu Jul 23, 2009 5:17 pm

KHR-3HV announcement from Kondo

2009-07-08T16:54:55+01:00

Here is some additional information I collected:

1)
There is a new product - KRI 3 - which is used as an "adapter" to connect KRC-3Ad and KRC-1 radio control units to KHR3HV

2)
There is a new ICS-USB adapter with high speed serial interface to "talk" to the new ICS 3.0 servos (such as the 2552 that comes with KHR 3HV)

3)
KHR3HV comes with 5 dummy servos that can be updated with a 5 servo pack for 5 extra DOF. The location of the servos I believe has been discussed in a post above.

4)
RAS 2 and KRG 4 are also compatible (not sure about KRG 3 - waiting for a confirmation).

5)
The new RCB 4HV controller board seems to have lots and lots of IO.
These are the specs I got for it so far:
Size: 35 x 45 x 12 mm
Weight: 11.8 g
Supply Voltage 9~12V; Internal Voltage: 5V

CPU: M16C26A running at 20Mhz

I/O:
8x SIO ports
10x A/D ports (0~5V)
10x PIO (5V)
1x COMM port (115,2kbps; 625kbps; 1.25Mbps)
1x SW port
2x LED (red, green)

I don't really know for sure the meaning of the abbreviations in the IO, but I believe SIO stand for Serial IO ports to connect servos (I think the servos work in a daisy chain model, since the board is said to support up to 35 servos).
A/D ports are self explanatory;
PIO I don't know what they are...
The 1xCOMM port should be for connecting to the PC
The 1x SW port I don't know what it is.

6)
The new Heart to Heart 4 software includes some nice new features.
The most advertised one is the ability to work in a "Team" model. I don't know exactly what this means but I would believe it has some features for collaboration and maybe a revision control system (I read something like "now you don't need to worry that another team member may overwrite your data").
It is now also compatible with RCB 4 and the ICS 3 serial servos.

Here is a picture comparing the dimensions of the various KHR editions:

Regards
Pedro.

Statistics: Posted by PedroR — Wed Jul 08, 2009 4:54 pm

KHR-3HV announcement from Kondo

2009-07-08T15:17:58+01:00

Hi all

We have more OFFICIAL information about KHR3HV.

This is official from IXS who represents Kondo and from we get all the Robots:

KHR-3HV : New Kondo Kagaku robot

During its 5th Anniversary (June 13th 2009), Kondo Kagaku has released the brand new KHR-3HV.
A new design, a new frame, much more DOF (dummy servo are included), a new stylish robot that will dramatically change once more the robot hobby market.

== Serial servos ==
Thanks to the use of serial servos, a digital chain is now possible. You can connect up to 17 serial servo motors KRS-2555HV. By using only one cable, it prevents troubles regarding disconnection.

== New frame ==
A design to ease and to smooth the folding of the knee has been enhanced.
Thanks to the new design, the robot can retract and stand up faster from a sitting pose.

== New angles and servo arms ==
Thanks to the strengthened servo arms, the robot is more resistant to shocks and thus
become a real ally during robot competitions.

== Dummy servos ==
Dummy servos have been added to the joints (hips, upper and lower arms). This new faculty will enable the user to add easily new joints and thus to set up new capabilities to the robot.

== Body cover ==
The main frame cover is made out a light ABS plastic. It is easy to change to another body frame. Thanks to the slim body, the user can handle the robot more easily.

== Maintenance ==
The new design of the back pack enables an easier maintenance of the robot. The user will be able to add easily sensors and motors.

== RCB-4 ==
The new micro controller board RCB-4 enables to connect serial servos. It is compatible with ICS3.0 module and a wide range of options parts. The user will be able to control the speed of servos. The input and analog ports enable a wide range of capabilities.
Heart to Heart has also been upgraded with new motions and a new type of
programming.

== Bath tub sole ==
The new design of the sole gives a more secure walk.

== Servo Head ==
The new design of the servo head makes it possible to assemble it naturally to the shoulder. It gives the robot a more intrepid style.

== Battery ==
A nickel battery 10.8V-800mAh has been included. It will take only one hour to charge
it.

Released period: Summer 2009.

FYI the first of batch of KHR3HV has been produced. We at Robosavvy are planning on bringing it in during the next month or so.

We will probably run a pre release campaign for KHR3HV where you'll be able to pre-order it but I'll announce further details in the near future as the first batch produced was made of very few units.

Statistics: Posted by PedroR — Wed Jul 08, 2009 3:17 pm

KHR-3HV announcement from Kondo

2009-06-24T12:09:09+01:00

Here's a link with much more detail on KHR-3HV

original
http://www.rakuten.co.jp/grass-road/507141/852661/861270/920589/

translated:
http://translate.google.com/translate?hl=zh-TW&sl=ja&tl=en&u=http%3A%2F%2Fwww.rakuten.co.jp%2Fgrass-road%2F507141%2F852661%2F861270%2F920589%2F

Statistics: Posted by l3v3rz — Wed Jun 24, 2009 12:09 pm

Re: KHR-3HV Price

2009-06-24T04:25:51+01:00

mkegruber wrote:
Hi,

I see on this link

They have item 03020 (KHR-3HV) listed for ¥ 119,700

That's an 'advance order' form for the KHR-3HV. Here's rough translation:

KHR-3HV Advance order form
Order * After this page, it is enciphered by SSL and you can apply safely.
On this page, please carry out an advance order before putting KHR-3HV on the market.
Please choose 代引き or a bank account transfer about payment.

Although I am planning the end of July about goods sale time, it is about details.
It notifies to our website at any time. Or I will contact you by e-mail.
Please push the confirmation button of the bottom after filling in the quantity of the following goods.
After having you confirm on a check page, an order is sent by e-mail.
* I will limit for a receiver's address in Japan.

Statistics: Posted by tempusmaster — Wed Jun 24, 2009 4:25 am

KHR-3HV Price

2009-06-18T20:03:20+01:00

Hi,

I see on this link

They have item 03020 (KHR-3HV) listed for ¥ 119,700

Regards
Michael

Statistics: Posted by mkegruber — Thu Jun 18, 2009 8:03 pm

KHR-3HV announcement from Kondo

2009-06-15T12:17:26+01:00

Thank you SK

Statistics: Posted by Ray — Mon Jun 15, 2009 12:17 pm

KHR-3HV announcement from Kondo

2009-06-15T07:08:05+01:00

That´d be "Go West" by the Pet Shop Boys.

Statistics: Posted by SK — Mon Jun 15, 2009 7:08 am

KHR-3HV announcement from Kondo

2009-06-14T04:23:58+01:00

who know the name of the song anyway?

Statistics: Posted by Ray — Sun Jun 14, 2009 4:23 am

KHR-3HV announcement from Kondo

2009-06-13T16:20:17+01:00

Hello guys,
I think so it has five extensions like servo size for optional adding. Two for elbow, two for hip and one for waist.
I see other two extensions in the arms, may be for grippers?
Anybody know more details?

Statistics: Posted by igor — Sat Jun 13, 2009 4:20 pm

KHR-3HV announcement from Kondo

2009-06-13T15:15:21+01:00

A fresh video of KHR-3HV from RT Corp.,
It seem KHR3-HV has a number of flexibility (extensions) including chest and arms. New Servo KRS-2552HV has 14Kgcm torque.

phpBB [media]

Statistics: Posted by Ray — Sat Jun 13, 2009 3:15 pm

KHR-3HV announcement from Kondo

2009-06-13T14:28:03+01:00

Orac wrote:
Wow, in the second photo, the back of its head is really realistic

a bit like thatsmyface.com

Statistics: Posted by limor — Sat Jun 13, 2009 2:28 pm

KHR-3HV announcement from Kondo

2009-06-13T14:10:51+01:00

Wow, in the second photo, the back of its head is really realistic

Statistics: Posted by Orac — Sat Jun 13, 2009 2:10 pm

KHR-3HV announcement from Kondo

2009-06-13T09:17:57+01:00

We've seen the announcement at robots-dreams.com few days ago.

Here's the first released pictures of the new robot from Kondo 5th KHR anniversary

From the text behind the robot I can see the name of a new servo KRS2552HV with 20kg-cm and new board RCB4HV. 20 servos. comes standard with wireless and probably gyro. sounds like fun.

Statistics: Posted by limor — Sat Jun 13, 2009 9:17 am