RoboSavvy Forum

Remote Control Problem

2007-10-15T04:36:04+01:00

I also agree about low batteries.
Mine has done some very strange things
as soon as the batteries go a little low.
My plan is to install a sensor and speech
so RN can let me know when the batteries
go low. For the remote, a good battery tester
should do the trick!

humanoido

Statistics: Posted by Humanoido — Mon Oct 15, 2007 4:36 am

Re: Remote Control Problem

2007-10-10T05:29:03+01:00

Viknesh wrote:
Hi. I have loaded all codes assigned to remote control buttons into the robonova. But when i press the remote control butons, robonova suddenly turns off all servos. Previously whole thing worked well. What could be the problem?.

May be DUE to low battery....

Statistics: Posted by keithwwy — Wed Oct 10, 2007 5:29 am

Remote Control Problem

2007-08-17T17:11:49+01:00

Code seems okay........Have you checked that the battery on the RoboNova is fully charged? Then yes maybe the remote battery but that doesn't explain the all off on the servos.

Very odd, will keep thinking

Pev

Statistics: Posted by Pev — Fri Aug 17, 2007 5:11 pm

Remote Control Problem

2007-08-17T10:26:49+01:00

Trouble with formatting, Post removed.

Statistics: Posted by DirtyRoboto — Fri Aug 17, 2007 10:26 am

Remote Control Problem

2007-08-17T07:44:07+01:00

This is the code. I did not use the method used in the overall template to assign codes to remote control. This code worked well until a few days ago. But when i keep on pressing the remote control, robonova starts to work well. I not sure whether it could be because of weak remote control battery.

MAIN:

A = REMOCON(1)

IF A = 25 THEN GOSUB Standard_Start
IF A = 1 THEN GOSUB Back_Pushups
IF A = 2 THEN GOSUB Pushups
IF A = 3 THEN GOSUB Swim
IF A = 4 THEN GOSUB Boxing
IF A = 5 THEN GOSUB Shoot

GOTO MAIN

Statistics: Posted by Viknesh — Fri Aug 17, 2007 7:44 am

Remote Control Problem

2007-08-17T07:36:41+01:00

Difficult to tell without seeing the code. Any chance you could post it?

Pev

Statistics: Posted by Pev — Fri Aug 17, 2007 7:36 am

Remote Control Problem

2007-08-16T08:22:52+01:00

Hi. I have loaded all codes assigned to remote control buttons into the robonova. But when i press the remote control butons, robonova suddenly turns off all servos. Previously whole thing worked well. What could be the problem?.

Statistics: Posted by Viknesh — Thu Aug 16, 2007 8:22 am