RoboSavvy Forum Robosavvy Forum: The largest online community of Humanoid Robot Builders 2008-03-03T12:51:28+01:00 http://forum.robosavvy.com/feed.php?f=4&t=2275 2008-03-03T12:51:28+01:00 2008-03-03T12:51:28+01:00 http://forum.robosavvy.com/viewtopic.php?t=2275&p=14554#p14554 <![CDATA[Hitec HG-R01 gyro...]]> Readable manual downloaded:)
About LCD-flashing for port baud rate is done,thanks to I-Bot and work excellent.
About gyro- it works, not any near to settings given in manual or in internet,but with my own, but it do).at least it works for not so powerfull hits and pushes

Statistics: Posted by Sazabi — Mon Mar 03, 2008 12:51 pm

]]> 2008-03-02T03:43:09+01:00 2008-03-02T03:43:09+01:00 http://forum.robosavvy.com/viewtopic.php?t=2275&p=14535#p14535 <![CDATA[Hitec HG-R01 gyro...]]>

Last thing,offtopic, i got Netmedia 4x20 LCD (9600baud), so as i found in other topic the only way to connect it is reprogramm robo controller. Can u share new program with me?

Before hacking into your controller, which is no simple task, and start changing the baud rates, you may want to get the gyro working first and invest in a 4800 baud display which is simply plug-in compatible with the unmodified controller.

humanoido

Statistics: Posted by Humanoido — Sun Mar 02, 2008 3:43 am

]]> 2008-03-02T03:44:13+01:00 2008-03-02T03:38:42+01:00 http://forum.robosavvy.com/viewtopic.php?t=2275&p=14534#p14534 <![CDATA[Hitec HG-R01 gyro...]]>

Aslo, did u ever downloaded robobasic command instruction manual from robonova.com? it's unreadable and i cant find my cd(

For the download, you may want to try again later. The download should start working. If not, another web site may do the trick. My download of robobasic worked fine from the Hitec web site. Sometimes a site will fail for no apparent reason and just check it later or the next day. Also, you may need to upgrade the Adobe PDF reader, if there's a problem with it.

If the CD is lost, don't panic. You can get even better newer updated materials from the Hitec web site in the downloads section.
:-)

humanoido

Statistics: Posted by Humanoido — Sun Mar 02, 2008 3:38 am

]]> 2008-03-01T22:02:27+01:00 2008-03-01T22:02:27+01:00 http://forum.robosavvy.com/viewtopic.php?t=2275&p=14530#p14530 <![CDATA[Hitec HG-R01 gyro...]]> Statistics: Posted by Sazabi — Sat Mar 01, 2008 10:02 pm

]]> 2008-02-28T23:19:18+01:00 2008-02-28T23:19:18+01:00 http://forum.robosavvy.com/viewtopic.php?t=2275&p=14494#p14494 <![CDATA[Re: Hitec HG-R01 gyro...]]>
Sazabi wrote:
Hello! Well,i bought this gyro. Plastic case is absolutely same as on GWS pg-03. Also, i saw video from www.theoddrobot.com about giro. I made same code, but when i push robo it starts tilting forward-backward and if i dont stop him,it will fall) So, anybody can tll me the reason of this? even gain doesn't help.

can it be that the gyro is mounted the wrong way and it is amplifying motion rather than damping ?

Statistics: Posted by limor — Thu Feb 28, 2008 11:19 pm

]]> 2008-02-23T17:09:07+01:00 2008-02-23T17:09:07+01:00 http://forum.robosavvy.com/viewtopic.php?t=2275&p=14335#p14335 <![CDATA[Hitec HG-R01 gyro...]]> www.theoddrobot.com about giro. I made same code, but when i push robo it starts tilting forward-backward and if i dont stop him,it will fall) So, anybody can tll me the reason of this? even gain doesn't help.
Tried hitech code supplied in gyro instruction-robo hit table with his head so hard that even IR sensor cage smaced((.
Aslo, did u ever downloaded robobasic command instruction manual from robonova.com? it's unreadable and i cant find my cd(
Last thing,offtopic, i got Netmedia 4x20 LCD (9600baud), so as i found in other topic the only way to connect it is reprogramm robo controller. Can u share new program with me?

Thank u!

Statistics: Posted by Sazabi — Sat Feb 23, 2008 5:09 pm

]]>