RoboSavvy Forum

Robonova playing dead

2008-03-06T11:36:53+01:00

well that makes sense...

He usually goes limp when he is standing still waiting for an input. During this time, i have used the print statement to ask the user to press key 1 in the remote. the print statement is looped till the user keys in the correct remote key. ( the LCD port is connected to a bluetooth that displays messages on my computer for debugging).

He doesnot go limp when he is doing something. I guess its because the print statement is used only rarely in this case.

There is only one way to find out. I will try to remove the print statement and see what happens.

By the way, the same happens everytime i use the music command.

I will try it tonite and will let the forum know. Thanx a million to all..

Statistics: Posted by Entrastic — Thu Mar 06, 2008 11:36 am

Robonova playing dead

2008-03-06T11:29:27+01:00

The servo loop is in an interrupt driven foreground, which should keep the servos pulsed on a regular basis.

There are still some things you can do in the background that can spoil this. Some of the background routines which have critical timing, disable the interrupts. These include music, RCIN, motorin, PRINT, remocon. Heavy repeated use of these will have a bad effect.

Statistics: Posted by i-Bot — Thu Mar 06, 2008 11:29 am

Robonova playing dead

2008-03-04T21:08:09+01:00

Are you using the sample program as is or have you modified it to support the devices that you unplugged?

The servo driver in RoboBasic runs in a tight loop. It has to send a pulse to each servo once every few milliseconds just to keep them happy. If the the program gets into trouble and the motor driver cannot refresh the servos in time then the robot will go limp. Pretty much any software error from an endless loop to a storage overlay can disable the servo driver and result in this symptom.

Statistics: Posted by Fritzoid — Tue Mar 04, 2008 9:08 pm

Robonova playing dead

2008-03-04T20:44:59+01:00

Is the battery in good condition?
How about the blue head LED? nice & bright?

This one is hard to diagnose aver the net.

Statistics: Posted by badlands — Tue Mar 04, 2008 8:44 pm

Robonova playing dead

2008-03-04T17:35:56+01:00

guys...

i really need some help really fast. My robonova goes limp sometimes when he is standing in the standard pose. All the servos go limp te same way it does when u issue a motorin command.

I initially thot it mite be because of some device plugged into it. So i removed everything and tried. It still does the same. It is hard to predict wen it will go limp. Can it be because of some fault in the main board.

When it goes limp, you cant download anything to the robot. It is as if the power is off.

i have to take him to an exhibition in 3 days time. So kindly kindly help me!!

Thanks

Statistics: Posted by Entrastic — Tue Mar 04, 2008 5:35 pm