RoboSavvy Forum Robosavvy Forum: The largest online community of Humanoid Robot Builders 2006-04-23T11:49:01+01:00 http://forum.robosavvy.com/feed.php?f=4&t=250 2006-04-23T11:49:01+01:00 2006-04-23T11:49:01+01:00 http://forum.robosavvy.com/viewtopic.php?t=250&p=1313#p1313 <![CDATA[Errors in the manual]]>
Have a look at my site:

http://www.antweight.co.uk/robonova/index.htm

I tried to point out all the issues I came across. It was mostly the leg servos than annoyed me.

Statistics: Posted by oliver_s — Sun Apr 23, 2006 11:49 am

]]> 2006-04-23T09:32:08+01:00 2006-04-23T09:32:08+01:00 http://forum.robosavvy.com/viewtopic.php?t=250&p=1310#p1310 <![CDATA[Errors in the manual]]>
On page 22, bottom left picture shows servo 3 connected to servo 4 and servo 1 connected to servo 2. Page 10 shows that 3 goes with 2 and 1 goes with 4. Which is correct?

On page 28, second picture from the bottom, shows servo 11 on the left and servo 12 on the right. If I line up the servos, with the black screws uppermost and the cables on the outside, 12 has to be on the left and 11 on the right!

Page 37, second to last photo calls up self tappers PH/T, these should be PH/M - machined bolts.

Are there any other errors?

Statistics: Posted by Richard — Sun Apr 23, 2006 9:32 am

]]>