RoboSavvy Forum

Behavior & Vista

2008-01-23T00:12:20+01:00

Maybe this help.

http://211.238.207.44/~robotis/jooya/Vi ... re(english).exe

Statistics: Posted by rustyarmor — Wed Jan 23, 2008 12:12 am

Behavior & Vista

2008-01-14T02:52:16+01:00

Hi,
Obviously a late reply, but I just figured it out as I had the same problem today. Just right click on the Behaviour program .exe and "run as administrator". That's it! If you're sure that your serial cable is working fine the it should work.
This is a really annoying part of Vista which has caused me problems many times. Generally, if a program in Vista doesn't seem to work right, try this option before choosing compatibility mode (which generally doesn't fix anything!).

Statistics: Posted by Dimitris — Mon Jan 14, 2008 2:52 am

Behavior & Vista

2007-08-09T07:59:32+01:00

Thanks for your help

Statistics: Posted by JI_YI_MI — Thu Aug 09, 2007 7:59 am

Behavior & Vista

2007-08-08T17:10:52+01:00

I am just waiting for the Farrell Robotics control suite that includes a motion editor and some type of behavioral language that will work on the CM-5 & CM-2 which will of course be Vista friendly

Statistics: Posted by cdraptor — Wed Aug 08, 2007 5:10 pm

Behavior & Vista

2007-08-08T14:19:52+01:00

I know that the Motion Editor and Robot Terminal work on both Vista 32-bit and 64-bit (I have communicated with a CM-2 using both), but Behavior Control Program does not seem to work on 64-bit (but works fine on 32-bit).

The COM port problem occurs when you are not a full admin for your computer (or you have User Acount Protection enabled). To get around this (and find the correct COM ports) you either have to disable UAP or right click on the program and select "run as admin". Note, microsoft does not recommend that you disable UAP - so I do take any responsibility for what happens.

-Hive

P.S. I think the reason that the Behavior software does not work on 64-bit has to do with an error it has upon starting (it wants to find some sort of *.rbt using Korean letters...). I was able to get it running on a 32-bit system though (and it found COM ports).

Statistics: Posted by hivemind — Wed Aug 08, 2007 2:19 pm

Behavior & Vista

2007-08-08T09:42:12+01:00

Ok thanks for informations i will install xp on 2nd boot

Statistics: Posted by JI_YI_MI — Wed Aug 08, 2007 9:42 am

Behavior & Vista

2007-08-07T13:01:07+01:00

Hi,
According to Robotis, Vista is not supported or tested at this time with Behavior Control and motion-editor..

Statistics: Posted by limor — Tue Aug 07, 2007 1:01 pm

Behavior & Vista

2007-08-06T08:44:24+01:00

Hi all

Sorry for my english

So i can't play with behavior on vista, i have select xp sp2 mode but the behavior didn't start. An when i don't select xp sp2 mode, there is not port avaible to connect CM5.

Do you know what can i do ?

Thanks

Statistics: Posted by JI_YI_MI — Mon Aug 06, 2007 8:44 am