RoboSavvy Forum

wireless comunication problem between cm-5 and zig2serial

2009-07-15T22:06:24+01:00

You have disconnected the serial cable, haven't you?

Statistics: Posted by StuartL — Wed Jul 15, 2009 10:06 pm

wireless comunication problem between cm-5 and zig2serial

2009-07-15T14:41:24+01:00

Hi Jeeves,

You might want to read over this thread, if you haven't already.
http://robosavvy.com/forum/viewtopic.php?t=1395

The example program is most likely sending the packets from CM5->PC correctly, whereas you may not be when you try to connect from PC->CM5.

The RXD LED will blink because you're sending data. Maybe you need to modify the example program to blink the LEDs on the Bioloid when it receives data to help troubleshoot this.

Statistics: Posted by kamondelious — Wed Jul 15, 2009 2:41 pm

wireless comunication problem between cm-5 and zig2serial

2009-07-08T19:03:06+01:00

I am using the zig100 module. When I send a data from CM-5 to PC is working correctly, but from PC to CM-5 don't.
I am using the example program of the Behavior Control Programmer. The CM-5 RXD led blink when I send the message from PC, but the program don't responds.
Can someone help me to understand what is happening?

Statistics: Posted by Jeeves — Wed Jul 08, 2009 7:03 pm