RoboSavvy Forum

Catch and play

2010-01-15T09:16:03+01:00

Do can I set catch and play with roboplus?

Statistics: Posted by UncleBob — Fri Jan 15, 2010 9:16 am

L button

2010-01-15T08:51:24+01:00

Isn't R stand for remote?

Statistics: Posted by UncleBob — Fri Jan 15, 2010 8:51 am

Remote also works with combination of keys.

2010-01-15T08:24:23+01:00

The other part is to press the left button first then press the play button and the lights should go green. I don't believe it will work while you have the red.

Statistics: Posted by marcdimmick — Fri Jan 15, 2010 8:24 am

Test Motion Vid

2010-01-15T08:04:45+01:00

phpBB [media]

Statistics: Posted by UncleBob — Fri Jan 15, 2010 8:04 am

Got it

2010-01-15T07:25:46+01:00

I flip the switch at the side of the USB2Dynamic dongle from TTL to RS232 and now I can control via notebook. Then the RoboPlus manager updated my firmware.

Still don't know if remote works or not.

Statistics: Posted by UncleBob — Fri Jan 15, 2010 7:25 am

I had the same problem and was given the fix

2010-01-15T07:22:18+01:00

Hi,
I had the same problem and I sent my CM-510, cable and USB device back and then they have since emailed the solution. It looks like you will need to do a firmware refresh. Check out my last posting on this site or go to my website http://www.robotusersaustralia.com/ click on Bioloid and then you will see the link for the process to refresh firmware.

Statistics: Posted by marcdimmick — Fri Jan 15, 2010 7:22 am

Bioliod Help

2010-01-15T08:49:59+01:00

Just finish building the bioliod premium. The posture is correct. But I cannot command it using the infrared remote. I install roboplus 1.0.15 in Bootcamp. It setups the port to com3 but roboplus cannot work.

Here is a video of what happens

phpBB [media]

Please help!! Thanks!!

Statistics: Posted by UncleBob — Fri Jan 15, 2010 6:30 am