RoboSavvy Forum

Bioloid Premium leg assembly issue

2010-06-15T15:32:27+01:00

Brother Rowwan..

Believe me this is the best way to do it , Otherwise you will cut the cable

no way to use the shortest cable you Should use a longer cable.

use your finger to push it down and make it flat . that will be OK .

Statistics: Posted by micro_snake — Tue Jun 15, 2010 3:32 pm

Bioloid Premium leg assembly issue

2010-06-15T06:34:06+01:00

Hi micro_snake... Nice picture, but definitely not the way it is described in the (Premium) manual. I need to use the shortest cable...

Statistics: Posted by Rowwan — Tue Jun 15, 2010 6:34 am

Bioloid Premium leg assembly issue

2010-06-15T03:40:47+01:00

Hi Brother ..

first Sorry for my weak English .

this is the right assembling for the leg . I hope this will help you .
sorry I used the long cable

Fahad Alawi
Saudi Arabia

Statistics: Posted by micro_snake — Tue Jun 15, 2010 3:40 am

Bioloid Premium leg assembly issue

2010-06-14T21:06:26+01:00

seems be the right wiring but the wire from id15 must stay behind the leg bracket.
follow the robotis documentation.
i was a newbie too and had no problem when assembling.

Statistics: Posted by FabinovX — Mon Jun 14, 2010 9:06 pm

Bioloid Premium leg assembly issue

2010-06-14T18:41:03+01:00

Hi, I'm currently busy building my first own robot... Although I thought is was going great, I became somewhat confused by the assembly of the wires in the legs.
When reading http://robosavvy.com/Builders/limor/BioloidPremiumBlog/Bioloid%2520Premium%2520Construction%2520Blog.html I noticed the following line:

Small mistake in the leg assembly was identified after an hour's work. Cables need to fit under the bracket. Need to disassemble and realign properly

with the following picture:

Is the picture showing the correct wiring (with the wires visible from outside, or is this picture showing the wrong wiring?

Statistics: Posted by Rowwan — Mon Jun 14, 2010 6:41 pm