RoboSavvy Forum

[Help] AX-12 and ATMEL AT89s52

2010-12-09T17:33:54+01:00

I think this post using arduino can help you.

And this wiki from the great Hylands :

gumstix - interfacing the AX-12 bus to a gumstix
pc serial - interfacing the AX-12 bus to a PC
pc usb - interfacing the AX-12 bus to a PC using USB

And, of course, the Bioloid robosavvy wiki.

Hope it helps you!

By the way... do you know usb2dynamixel? although it's not mainly for microcontrollers...

Statistics: Posted by siempre.aprendiendo — Thu Dec 09, 2010 5:33 pm

[Help] AX-12 and ATMEL AT89s52

2010-12-07T14:56:23+01:00

Hello shi welcome to the forums. I'm new too and I'm not an expert in these matters by any measure but to answer your question yes, its certainly possible to control an AX12 from a different microcontroller.

If you take a look at the forums relating to the Roboard for instance and also do a search for Actuated Character which contains some useful insight that will go some way to help you to get a start...

Im sorry that I dont know anything specific about the microcontroller you mention but someone here will.

Whatever your level of understanding is now, it will increase as a result of looking around here and asking a few questions. Its a rewarding and interesting hobby, if not a little expensive, but I like it...

You may be a professor in robotics so I apologise if this sounds patronising as it isnt meant to be - dont be put off by some of the highly technical things you will undoubtedly find. I have read some very intimidating material here, on a level way, way beyond my understanding - but stick with it and things become clearer sooner than you think.

Statistics: Posted by RoboFlop — Tue Dec 07, 2010 2:56 pm

[Help] AX-12 and ATMEL AT89s52

2010-12-07T13:56:02+01:00

Hi everybody,
I am a new member and also new in everything about Robotis.

I want to build a Delta Robot using Dynamixel AX-12 as its actuator and I'm planning to use ATMEL AT89s52 as its microcontroller. What I'm asking is:
- is it possible to use AT89s52 to program the Dynamixel actuator?
- is it possible to use the Dynamixel actuator without using CM-5?

Thank you so much for your assistance.[/b]

Statistics: Posted by shi — Tue Dec 07, 2010 1:56 pm