Crustcrawler Smart Arm AX-12A + CM-700+ roborealm AVM

2012-05-29T10:46:16+01:00

The usual approach is not to use the parameters within the AX12 to control the speed and "smoothness" of the motion.
The desired motion distance and transit time, are taken and an appropriate position curve over time mapped between them in software. The curve is split into segments on a time spacing of around 20 millisec per segment, and the positions then sent to the servo on this timeframe.
This software is usually better done in the CM700 so the update speed is not impacted by and slow communication with the computer.

Statistics: Posted by i-Bot — Tue May 29, 2012 10:46 am

Crustcrawler Smart Arm AX-12A + CM-700+ roborealm AVM

2012-05-29T10:00:04+01:00

Hi Robosavvy community,

I have a bit of problem on AX12 dynamixel. I am now using crustcrawler robot arm and roborealm.. I try to make a pan and tilt program for arm robot..

First try I have make a program just to make the robot follow an object on x-axis(horizontal, base servo only).. the program working fine, but the movement of the robot is not smooth..

this is one part of the VB script program..

.
.
.
if dX > threshold and turret_h > -512 then
' The object is at left side
turret_h = turret_h + 1
end if
.
.
if dX < -threshold and turret_h < 511 then
' The object is at right side
turret_h = turret_h - 1
end if
.
.
.
turret_v128 = turret_v + 512

The variable "turret_v128" is sent to servo 1, as a "goal position" value.. the +1 is small value, maybe robot base cannot move precisely because other factor such as load..

The question is, what other variable I must find and sent to dynamixel motor so it can move smoothly? example: CW/CCW compliance slope/margin or moving speed or torque limit?

Roborealm AVM module:

Roborealm dynamixel module

Roborealm VB script module:

Example movement I want:
http://youtu.be/94VqAmtHlFA

My robot movement 1:
http://youtu.be/OlgV-7UE5Us

My robot movement 2:
http://youtu.be/HY4O_8jNz8g

Statistics: Posted by adamsya — Tue May 29, 2012 10:00 am

RoboSavvy Forum

Crustcrawler Smart Arm AX-12A + CM-700+ roborealm AVM

Crustcrawler Smart Arm AX-12A + CM-700+ roborealm AVM