RoboSavvy Forum Robosavvy Forum: The largest online community of Humanoid Robot Builders 2013-09-12T20:59:42+01:00 http://forum.robosavvy.com/feed.php?f=5&t=9768 2013-09-12T20:59:42+01:00 2013-09-12T20:59:42+01:00 http://forum.robosavvy.com/viewtopic.php?t=9768&p=38565#p38565 <![CDATA[Problem with RC-100]]>
I've try again and remote RC-100 works perfect with IR.
The cable between PC and controller must be disconnected for use the IR remote.

But I have already the same problem with ZIG-110 module.

Statistics: Posted by Jey — Thu Sep 12, 2013 8:59 pm

]]> 2013-09-11T02:17:31+01:00 2013-09-11T02:17:31+01:00 http://forum.robosavvy.com/viewtopic.php?t=9768&p=38556#p38556 <![CDATA[Problem with RC-100]]>
I have three Bioloid Premium kit and I have a problem with the RC-100 remote.

I have made a little program (based on Robotis program) for testing RC-100 (with IR and after with ZIG-100 module) but it does nothing when I press the button.
The LED AUX on controller should be power ON when I press "U" button and power OFF when I press "D" button.......

And I have the same problem with the ZIG-100 module.
I tried with my three differents kits and controllers (CM-510) but :cry:
RC-100 with Zigbee module is power ON with a blue LED and the robot module is blinking slowly. I put, in CM-510, the ID distant of my remote module. When I change the ID distant, the LED is blinking quickly.
But no synchro.

Could you help me please ?

P.S. : Sorry for my English I'm French ;-)

Thanks

Statistics: Posted by Jey — Wed Sep 11, 2013 2:17 am

]]>