RoboSavvy Forum

LynxMotion solution

2006-09-27T21:20:10+01:00

Sheesh, a week ago I had no idea, now I have a plethora, including two commercial solutions!

So in addition to the forthcoming ServoCity solution, I just now stumbled across an already-shipping part from Lynxmotion that solves this problem as well. I'm still looking for some details about it, but basically, it fastens on to the bottom of the servo and provides an idler axle. They have ball-bearing versions, too, and they come in several sizes.

Here's the catalog page — scroll down to the bottom to see these things (which they call "servo hinges" for some reason). And here's the thread where I'm hoping to get more detail.

Cheers,
— Joe

Statistics: Posted by Joe — Wed Sep 27, 2006 9:20 pm

ServoCity coming out with a solution!

2006-09-27T17:03:28+01:00

I just got word from ServoCity that they're producing a part to address this very problem, which should be available in about a month. It will work with any standard-sized Hitec servo.

(Hopefully I'm not breaking any confidence here -- the guy from ServoCity didn't say it was confidential, and I figure the extra publicity only helps them.)

I can't wait to see what they have to offer.

Best,
— Joe

Statistics: Posted by Joe — Wed Sep 27, 2006 5:03 pm

How to attach the other side of the servo?

2006-09-27T01:14:38+01:00

DerekZahn wrote:
Excellent questions, but I don't think you'll like the answers
...
In both cases, the changes to the servo case are irreversible, but that didn't bother me in particular.

Well, thanks for the explanation! Knowledge is power.

It's still a good technique, but you're right, it now goes in the bin with several others that involve permanent modifications to the servo case. That doesn't make them bad... just makes me think a little more carefully before trying them.

In a way, it's kind of fun that there is no standard solution to this problem. Apart from people buying stock brackets (e.g. Kondo or LynxMotion), it almost seems like everyone has solved this his own way. That's fun, because it indicates that the hobby is still maturing, and I'm not too late to get in on the exciting part!

Cheers,
— Joe

Statistics: Posted by Joe — Wed Sep 27, 2006 1:14 am

How to attach the other side of the servo?

2006-09-27T01:07:13+01:00

Excellent questions, but I don't think you'll like the answers

For the bolts, I replaced the stock bolts with longer 2-56 machine screws. These are a bit bigger than the stock ones but a little muscle with a screwdriver makes them cut their own threads through the existing ones. I haven't had any trouble with them failing.

It would be possible to use a low-head flat bolt for the spacer mounting like you suggest. I just drilled a hole in the back plate for the head of the screw to poke through though.

In both cases, the changes to the servo case are irreversible, but that didn't bother me in particular.

Statistics: Posted by DerekZahn — Wed Sep 27, 2006 1:07 am

How to attach the other side of the servo?

2006-09-26T22:53:27+01:00

Another question or two regarding this technique:

DerekZahn wrote:
it's just a piece of 1/4" diameter threaded spacer that is bolted onto the aluminum plate from behind. The plate is attached to the servo back through the existing bolt holes.

I opened up a servo for the first time yesterday (yes, I'm that green!) and imagined applying this technique. On my servo at least, the threaded part of the bolts isn't very long. Also, the existing back plate has recesses for the bolt heads; the new plate, of course, doesn't have these. The result is that the bolts are now maybe 0.125" less deep into their threaded holes inside the servo.

Have you observed this causing any problems with the servo case pulling apart under stress? Or have you replaced the original bolts with your own longer ones?

Also, it looks in the picture like the aluminum plate is flush with the servo backplate. How'd you manage that, if the spacer is bolted onto it from behind? Did you put a taper on the hole so the bolt head could sit flush?

Thanks,
— Joe

Statistics: Posted by Joe — Tue Sep 26, 2006 10:53 pm

How to attach the other side of the servo?

2006-09-24T16:15:13+01:00

DerekZahn wrote:
it's just a piece of 1/4" diameter threaded spacer that is bolted onto the aluminum plate from behind. The plate is attached to the servo back through the existing bolt holes.

That's very clever. I've been collecting solutions to this problem, and this is solution #7 -- and so far my favorite. It's simple, looks strong, and doesn't permanently modify the servo.

Regarding the worm gear box, you wrote:

DerekZahn wrote:
At over 90mm long, it seems kind of big. 5 kg-cm of torque isn't that great either, though running at a higher voltage would get more. Putting in a stronger motor like you suggest could be a good option, but then I'd start to worry about that plastic final gear stripping. They certainly are attractively priced though!

Yeah, that's about how I feel about it too. It would probably force a biped to be a good 50% taller than a standard Robo-One bot, though that's not necessarily a bad thing. I too worry about stripping the plastic gears... though it only has three of them; I suspect you could replace them with metal ones as needed and still come out substantially cheaper than a high-torque servo.

I suspect I'll pursue that approach for my own biped someday, but I'm also going to try out this threaded-stud technique you've shown for some servos. There's certainly room for both approaches.

Thanks,
- Joe

Statistics: Posted by Joe — Sun Sep 24, 2006 4:15 pm

How to attach the other side of the servo?

2006-09-24T01:11:27+01:00

Joe wrote:
I really like your Bing robot too. I hope you don't mind a couple of questions about it...

Thanks! I'm completely starting from scratch on a new version.

1. Where'd you get (or how'd you make) that nifty support shaft shown in bing5.jpg above?

it's just a piece of 1/4" diameter threaded spacer that is bolted onto the aluminum plate from behind. The plate is attached to the servo back through the existing bolt holes.

2. Bing5.jpg?!? Your web page only shows up to Bing 2.

Yeah, that number is just the photo number. Bing 2 has been abandoned and now I'm working on Bing 2A.

3. You mentioned that you couldn't find any suitable servo-mount gears. Have you seen these at ServoCity?

I do remember looking into those. If my recollection is correct, the spline is actually a plastic insert into the metal gear, which I was afraid would strip.

4. When considering alternatives to servos, did you consider something like the Tamiya Worm Gearbox HE in combination with a stronger motor, like the Mabuchi RE-360? (I'm currently considering this as an approach to a humanoid robot myself, so I'm keenly interested to hear your opinion on it.)

I haven't considered it, it looks interesting though. More stats can be found at:

http://www.robotmarketplace.com/marketp ... otors.html

At over 90mm long, it seems kind of big. 5 kg-cm of torque isn't that great either, though running at a higher voltage would get more. Putting in a stronger motor like you suggest could be a good option, but then I'd start to worry about that plastic final gear stripping. They certainly are attractively priced though!

Statistics: Posted by DerekZahn — Sun Sep 24, 2006 1:11 am

How to attach the other side of the servo?

2006-09-23T20:05:53+01:00

DerekZahn wrote:
Here's another possible idea that is similar to what some robots do:

http://www.happyrobots.com/bing5.jpg

That's neat. I really like your Bing robot too. I hope you don't mind a couple of questions about it...

1. Where'd you get (or how'd you make) that nifty support shaft shown in bing5.jpg above?

2. Bing5.jpg?!? Your web page only shows up to Bing 2.

3. You mentioned that you couldn't find any suitable servo-mount gears. Have you seen these at ServoCity?

4. When considering alternatives to servos, did you consider something like the Tamiya Worm Gearbox HE in combination with a stronger motor, like the Mabuchi RE-360? (I'm currently considering this as an approach to a humanoid robot myself, so I'm keenly interested to hear your opinion on it.)

Thanks,
- Joe

Statistics: Posted by Joe — Sat Sep 23, 2006 8:05 pm

How to attach the other side of the servo?

2006-09-23T02:15:02+01:00

I think there are lots of ways to go about it. I know you looked at Lynxmotion already, but variations on this idea aren't too bad:

http://www.lynxmotion.com/images/Produc ... asb04b.jpg

Here's another possible idea that is similar to what some robots do:

http://www.happyrobots.com/bing5.jpg

which is basically the same idea as this:

http://robosavvy.com/Assembly/2

Statistics: Posted by DerekZahn — Sat Sep 23, 2006 2:15 am

How to attach the other side of the servo?

2006-09-23T00:45:22+01:00

hivemind wrote:
if you go to page 41 here you can see that there is a bearing that serves the purpose of the idler, and these are the best servos out there, so it is clearly the way to go. I know that if I had a lot of money and could afford to go to Robo-one that i would use these servos.

Wow -- me too, but at $90 each, I can't afford even one, let alone 20.

That's why I was hoping there was some common solution for using standard-shaped servos -- that way I can start with inexpensive ones like the HS-422, and later replace them with higher-power ones of the same shape. But it may be that most of the Robo-One competitors are simply using the higher-end, nonstandard servos that offer some sort of idler or bearing.

Thanks,
- Joe

Statistics: Posted by Joe — Sat Sep 23, 2006 12:45 am

How to attach the other side of the servo?

2006-09-23T00:04:25+01:00

That is one big robot . The apearance of the slim servo idler is just an affect of the size, it's deceptive.

if you go to page 41 here you can see that there is a bearing that serves the purpose of the idler, and these are the best servos out there, so it is clearly the way to go. I know that if I had a lot of money and could afford to go to Robo-one that i would use these servos.

-peace

Statistics: Posted by hivemind — Sat Sep 23, 2006 12:04 am

How to attach the other side of the servo?

2006-09-22T23:38:31+01:00

hivemind wrote:
You are going to want some kind of idler horn or similar idea.

Yes, I understand that, and I do appreciate the reply. But I'm asking how specifically most of the Robo-One competitors do it. They're not all using RN-1 servos, are they? Are idler horns available as add-ons to a standard servo? If so, I haven't been able to find them. Can you point me to a source?

Also, whatever they're using appears to be very slim. If you look at something like
King Kizer, it looks like the brackets are connected directly to the servo case -- but of course that's impossible. How do they do that?

Thanks,
- Joe
[/url]

Statistics: Posted by Joe — Fri Sep 22, 2006 11:38 pm

How to attach the other side of the servo?

2006-09-22T23:23:55+01:00

You are going to want some kind of idler horn or similar idea. The idler horn idea used in the RN-1 works... decent, but a better way to do this is with a bearing, which is how the robotis servos do this. So besides having a motor shaft that can drive all the way through the servo (which i have not seen) an idler or bearing is the way to go.

Statistics: Posted by hivemind — Fri Sep 22, 2006 11:23 pm

How to attach the other side of the servo?

2006-09-22T22:20:36+01:00

I'm just getting into the hobby, and trying to make sure I don't invest too much in the wrong direction. My current quandry is this: standard-shaped servos have a control horn on only one side; the other side is smooth. How do you attach *both* sides of a joint to such a servo, so that you're not putting undue lateral strain on the servo shaft?

I've studied the pictures of lots of real Robo-One bots in Japan, and they've all solved this somehow. I know some of the higher-end servos have a special shape or add-ons (e.g., the RN-1 servos can come with idler horns). But I can't believe they're all using those. I'm also aware of the LynxMotion brackets, but those seem substantially bulkier and (to be blunt) uglier than what I'm seeing on the Robo-One competitors.

So... any insight on how those guys are making a pivot point on the back side of each servo?

Thanks,
— Joe

Statistics: Posted by Joe — Fri Sep 22, 2006 10:20 pm