lynxmotion tri-track
lynxmotion tri-track
by 06yz250f
Sun Jul 20, 2008 8:46 pm
i have been trying to get answers on their forums but just dont seem to be getting anywhere. but my question is i want to make the tri-track they have autonomous. im new to robotic, have basic knowledge on electronics from previous rc experience. if any one could help me know what i would need for it to be autonomous and all parts i would need. the kit comes with no electronics. any help would be great. thanks in advance
by Orac
Sun Jul 20, 2008 11:45 pm
Hi, you only posted yesterday on the forum, give it a little more time.
What they like to see is a lot more detail on what you are trying to achieve.
A detailed project plan would go a long way to getting some more directed help.
Also, make sure that you have read every thread in that tracked vehicle forum. It will take a long time, but will be worth it in the end.
Posts on these forums sometimes take many days before someone comes along with the skills to answer your question.
Good luck.
What they like to see is a lot more detail on what you are trying to achieve.
A detailed project plan would go a long way to getting some more directed help.
Also, make sure that you have read every thread in that tracked vehicle forum. It will take a long time, but will be worth it in the end.
Posts on these forums sometimes take many days before someone comes along with the skills to answer your question.
Good luck.
by 06yz250f
Mon Jul 21, 2008 1:22 am
well i honestly and kinda clueless and need to order soon bc i will be moving in less than 2 weeks. i have read all the tri-track stuff but have not seen any one go into detail on how they made the robots like specific parts. all i want is a list of parts to use to make the tri-track autonomous. any help would be great.
by Orac
Mon Jul 21, 2008 2:44 pm
Hi, After a minute or two of searching I found this
http://www.lynxmotion.com/images/html/build115.htm
Which has all the parts shown in detail.
I don't know anything about it, but looks like you will need at least
Base kit (no electronics)
Sabertooth
SSC-32 (depends on what extra functionality you will need)
Bot board
LM software
Batteries
Any sensors you may want or a camera if you intend to control this from a PC (if so, you could probably substitute the bot board for a Bluetooth link and control from RoboRealm)
http://www.lynxmotion.com/images/html/build115.htm
Which has all the parts shown in detail.
I don't know anything about it, but looks like you will need at least
Base kit (no electronics)
Sabertooth
SSC-32 (depends on what extra functionality you will need)
Bot board
LM software
Batteries
Any sensors you may want or a camera if you intend to control this from a PC (if so, you could probably substitute the bot board for a Bluetooth link and control from RoboRealm)