Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

What Firm ware am I running?

Korean company maker of Robot kits and servos designed for of articulated robots. Re-incarnation of Megarobotics.
3 posts • Page 1 of 1
Post a reply
3 posts • Page 1 of 1

What Firm ware am I running?

Post by dreamray » Sat Aug 15, 2009 11:04 pm

Post by dreamray
Sat Aug 15, 2009 11:04 pm

Hi

I've just moved up from a Robophilo to a second hand 5720K RoboBuilder and want to find out what version of the firm ware is loaded. Can anyone tell me if this can be done and how i can do it?
Hi

I've just moved up from a Robophilo to a second hand 5720K RoboBuilder and want to find out what version of the firm ware is loaded. Can anyone tell me if this can be done and how i can do it?
dreamray
Robot Builder
Robot Builder
Posts: 9
Joined: Sat Aug 15, 2009 10:54 pm
Top

Post by Ketchup » Sat Aug 15, 2009 11:16 pm

Post by Ketchup
Sat Aug 15, 2009 11:16 pm

Yes. Use the "Robobuilder Diagnostic Tool" or the "Robobuilder Download Tool". They will show the firmware number of the RBC. It's on the CD that came with the Robobuilder. I think the "download tool" can be downloaded from Robobuilder.net.
Yes. Use the "Robobuilder Diagnostic Tool" or the "Robobuilder Download Tool". They will show the firmware number of the RBC. It's on the CD that came with the Robobuilder. I think the "download tool" can be downloaded from Robobuilder.net.
Ketchup
Savvy Roboteer
Savvy Roboteer
Posts: 48
Joined: Thu Dec 25, 2008 9:11 pm
Top

Post by dreamray » Sun Aug 16, 2009 9:11 am

Post by dreamray
Sun Aug 16, 2009 9:11 am

Thanks. I used the Diag tool and it showed the controller running 2.0F.

I have now successfully uploaded the latest firmware and re-checked the controller. Every thing is working fine, it's reporting a change but shows 2.17 not 2.23 as the download file says. I tried this with the earlier version posted on the forum, 2.22 and that shows 2.16 via the diag tool. I assume this is correct? why the difference?
Thanks. I used the Diag tool and it showed the controller running 2.0F.

I have now successfully uploaded the latest firmware and re-checked the controller. Every thing is working fine, it's reporting a change but shows 2.17 not 2.23 as the download file says. I tried this with the earlier version posted on the forum, 2.22 and that shows 2.16 via the diag tool. I assume this is correct? why the difference?
dreamray
Robot Builder
Robot Builder
Posts: 9
Joined: Sat Aug 15, 2009 10:54 pm
Top

3 posts • Page 1 of 1
Post a reply
3 posts • Page 1 of 1
Return to RoboBuilder