Robobuilder hexapod/Spider Motion Files Available
Robobuilder hexapod/Spider Motion Files Available
by PedroR
Wed Jun 08, 2011 5:44 pm
Hi all
We've received a complete set of Motion Files for using the Robobuilder as a Hexapod.
The Robobuilder Hexapod has 18 DoF and we've been selling the Hexapod Complementary Kit (a set of 2 servos and an extra joint set) since we first released it.
However we had never really been able to get a Full Set of Motion Files for the Spider that were ready to use... until today!
We finally got them and they're available for download, along with Assembly instructions, here:
http://robosavvy.com/RoboSavvyPages/Rob ... podSpider/
If you have 2 spare servos around (they can be 1108 or 111; both types will work) you may want to try this one out. The only thing you might need is an extra joint set(which is fairly inexpensive) as according to Robobuilder the standard kit doesn't have enough joints to build the spider.
You can check the assembly instructions (there are a few simple, but important steps to follow) on the Hexapod Complementary Kit page, here.
Here is a video we've made with the Assembled spider, running the set of Motion Files we've now made available for download:
The Complete Hexapod Complementary Kit (a set of 2x wCK 1111 servos and a joint Set) is available here http://robosavvy.com/store/product_info ... cts_id/446
Pedro.
We've received a complete set of Motion Files for using the Robobuilder as a Hexapod.
The Robobuilder Hexapod has 18 DoF and we've been selling the Hexapod Complementary Kit (a set of 2 servos and an extra joint set) since we first released it.
However we had never really been able to get a Full Set of Motion Files for the Spider that were ready to use... until today!
We finally got them and they're available for download, along with Assembly instructions, here:
http://robosavvy.com/RoboSavvyPages/Rob ... podSpider/
If you have 2 spare servos around (they can be 1108 or 111; both types will work) you may want to try this one out. The only thing you might need is an extra joint set(which is fairly inexpensive) as according to Robobuilder the standard kit doesn't have enough joints to build the spider.
You can check the assembly instructions (there are a few simple, but important steps to follow) on the Hexapod Complementary Kit page, here.
Here is a video we've made with the Assembled spider, running the set of Motion Files we've now made available for download:
phpBB [media]
The Complete Hexapod Complementary Kit (a set of 2x wCK 1111 servos and a joint Set) is available here http://robosavvy.com/store/product_info ... cts_id/446
Pedro.
