Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

USB device problem(

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
3 posts • Page 1 of 1
Post a reply
3 posts • Page 1 of 1

USB device problem(

Post by Sazabi » Thu Jan 21, 2010 5:54 pm

Post by Sazabi
Thu Jan 21, 2010 5:54 pm

Hi,
Hope you could help me somehow. I'm out of anny ideas.
The issue is: I got TP-LINK TL-WN322G usb wifi module.
When I try to instal driver on Win XP SP3 on my Roboard, Win shows error 10 (bad driver).
If I try to reinstall it few times, module appears in system, I even can set up wifi connection, but after i replug it, erro appears again.
I tried it on different PC and everywhere it works great.
I got UBS Bluetooth module and it works or Roboard just fine.
Don't know what to do(.
By the way, if I turn USB Device in BIOS to Enabled, Win finds some iRDA Device and trying to install it, but there is no driver.
Hi,
Hope you could help me somehow. I'm out of anny ideas.
The issue is: I got TP-LINK TL-WN322G usb wifi module.
When I try to instal driver on Win XP SP3 on my Roboard, Win shows error 10 (bad driver).
If I try to reinstall it few times, module appears in system, I even can set up wifi connection, but after i replug it, erro appears again.
I tried it on different PC and everywhere it works great.
I got UBS Bluetooth module and it works or Roboard just fine.
Don't know what to do(.
By the way, if I turn USB Device in BIOS to Enabled, Win finds some iRDA Device and trying to install it, but there is no driver.
Sazabi
Savvy Roboteer
Savvy Roboteer
Posts: 73
Joined: Mon Jan 07, 2008 8:57 am
Top

Post by Sazabi » Tue Jan 26, 2010 8:02 pm

Post by Sazabi
Tue Jan 26, 2010 8:02 pm

Hi there!

Connected my Genius Look 312 webcam to roboard today. After launching webcam software blue screen with usbvm31b.sys error appears( In BIOS all USB setting set to "enable". Looks like I got some serious problems with USB stuff on my Roboard(.
Hi there!

Connected my Genius Look 312 webcam to roboard today. After launching webcam software blue screen with usbvm31b.sys error appears( In BIOS all USB setting set to "enable". Looks like I got some serious problems with USB stuff on my Roboard(.
Sazabi
Savvy Roboteer
Savvy Roboteer
Posts: 73
Joined: Mon Jan 07, 2008 8:57 am
Top

Post by roboard » Fri Jan 29, 2010 11:15 am

Post by roboard
Fri Jan 29, 2010 11:15 am

the USB device default is "DIsable",,,,, the "Enable" function was reserved for OTG, so far there is hard to have driver to support. suggestion no need to change to "enable"
the USB device default is "DIsable",,,,, the "Enable" function was reserved for OTG, so far there is hard to have driver to support. suggestion no need to change to "enable"
roboard
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am
Top

3 posts • Page 1 of 1
Post a reply
3 posts • Page 1 of 1
Return to Roboard - x86 Embedded Robot Board