Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Installing WinCE 6.0 on RB110

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1

Installing WinCE 6.0 on RB110

Post by maysamsh » Thu Feb 09, 2012 3:09 pm

Post by maysamsh
Thu Feb 09, 2012 3:09 pm

Is there a tutorial for installing WinCE on RB-110 from scratch?
Is there a tutorial for installing WinCE on RB-110 from scratch?
maysamsh
Newbie
Newbie
Posts: 2
Joined: Thu Feb 09, 2012 2:58 pm
Top

Post by roboard » Fri Feb 10, 2012 5:15 am

Post by roboard
Fri Feb 10, 2012 5:15 am

You can download the evaluation image from this website:
http://tech.icop.com.tw/wince/11042101.zip .
You can download the evaluation image from this website:
http://tech.icop.com.tw/wince/11042101.zip .
roboard
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am
Top

Post by maysamsh » Fri Feb 10, 2012 7:10 am

Post by maysamsh
Fri Feb 10, 2012 7:10 am

How should I use this image?
How should I use this image?
maysamsh
Newbie
Newbie
Posts: 2
Joined: Thu Feb 09, 2012 2:58 pm
Top

Post by roboard » Mon Feb 13, 2012 1:34 pm

Post by roboard
Mon Feb 13, 2012 1:34 pm

Hi, you can follow these steps:

step 1: intall dos to micro sd card,

step 2: move loadcepc.exe to micro sd card,

step 3: move NK.bin to micro sd card,

step 4: run dos on RB-110, then run loadcepc.exe.
Hi, you can follow these steps:

step 1: intall dos to micro sd card,

step 2: move loadcepc.exe to micro sd card,

step 3: move NK.bin to micro sd card,

step 4: run dos on RB-110, then run loadcepc.exe.
roboard
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am
Top

4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1
Return to Roboard - x86 Embedded Robot Board