Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Where could I repair my havimo camera??

Created by Prof. Hamid Moballegh of The Robocup Humanoid Team of Freie Universität Berlin - fumanoids.de
2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1

Where could I repair my havimo camera??

Post by Karo » Fri Sep 28, 2012 1:53 pm

Post by Karo
Fri Sep 28, 2012 1:53 pm

My camera doesn't work and the PCB is very hot
Please help me! it's my thesis

Thank you very much!
att. Carolina
My camera doesn't work and the PCB is very hot
Please help me! it's my thesis

Thank you very much!
att. Carolina
Karo
Robot Builder
Robot Builder
Posts: 8
Joined: Sun Jul 29, 2012 8:29 pm
Top

Post by hamid_m » Sat Sep 29, 2012 6:34 am

Post by hamid_m
Sat Sep 29, 2012 6:34 am

Hi Karo,

The description looks like an electrical/Physical damage to the module.
It may be caused by a short circuit, for example if the 12v line somehow touches one of the camera or micro controller pins.

The module cannot be repaired in this case.

Best regards,
Hamid.
Hi Karo,

The description looks like an electrical/Physical damage to the module.
It may be caused by a short circuit, for example if the 12v line somehow touches one of the camera or micro controller pins.

The module cannot be repaired in this case.

Best regards,
Hamid.
hamid_m
Savvy Roboteer
Savvy Roboteer
Posts: 133
Joined: Thu May 03, 2007 4:56 pm
Top

2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1
Return to HaViMo - Robotic Vision Module