Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Under $20 Robot stand :)

KHR-1, KHR-2HV, KHR-3HV, ICS servos, RCB controllers and other Kondo products
2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1

Under $20 Robot stand :)

Post by Droid Works » Fri Nov 09, 2007 9:35 am

Post by Droid Works
Fri Nov 09, 2007 9:35 am

I seen some of those robot stands ranging from $99-$299 for $1 worth of metal. So I went to wall mart and bought a camera stand for $17 and a bungee cord for $1 total $18 plus tax for a robot stand.

Image
I seen some of those robot stands ranging from $99-$299 for $1 worth of metal. So I went to wall mart and bought a camera stand for $17 and a bungee cord for $1 total $18 plus tax for a robot stand.

Image
Droid Works
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 185
Joined: Fri Aug 24, 2007 1:01 am
Location: Syracuse NY
Top

Post by TexasDave » Sat Nov 10, 2007 5:14 am

Post by TexasDave
Sat Nov 10, 2007 5:14 am

I built my own stand from wood for my Robonova. It was inexpensive. It looks like the shoulder brackets on the KHR are larger than on the Robonova. I use twist ties to connect the robot to the stand, but I like your use of bungee. I will have to find a very short bungee cord to do the same for mine. My stand is not too much bigger than the robot and fits on my desk, which I like.

Photos in this post:
http://robosavvy.com/forum/viewtopic.php?p=12180#12180
I built my own stand from wood for my Robonova. It was inexpensive. It looks like the shoulder brackets on the KHR are larger than on the Robonova. I use twist ties to connect the robot to the stand, but I like your use of bungee. I will have to find a very short bungee cord to do the same for mine. My stand is not too much bigger than the robot and fits on my desk, which I like.

Photos in this post:
http://robosavvy.com/forum/viewtopic.php?p=12180#12180
TexasDave
Robot Builder
Robot Builder
Posts: 10
Joined: Sun Sep 30, 2007 7:14 pm
Top

2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1
Return to KHR-1, KHR-2HV, KHR3-HV & Kondo