KHR-2HV !!!

[SirAho]

I have a question about the KHR-2HV set.
To do advanced settings for the servos do I need to buy a extra USB-ICS interface or can I do it through the RCB-3J?

[tempusmaster]

KHR-2HV and KHR-1 side by side..

Good comparison photo.

Do you also have the side view that shows both of them crouching down as far as possible? The leg geometry is drastically different enabling the KHR-2HV to bring it's COG way down similar to the Robonova.

The original KHR-1 couldn't get down that far which is a big disadvantage during the fights in the ring. 8O

[limor]

I have a question about the KHR-2HV set.
To do advanced settings for the servos do I need to buy a extra USB-ICS interface or can I do it through the RCB-3J?

official reply from Japan:

Code: Select all

If you want to change the setting for the servo you need USB-ICS.
You use this interface to change the setting.
RCB-3J does not support to change the setting for the servo.

[SirAho]

If you want to change the setting for the servo you need USB-ICS.
You use this interface to change the setting.
RCB-3J does not support to change the setting for the servo.

Thank you!!

[limor]

Here's another picture of the KHR-2HV with knees bent side by side with KHR-1. Note how the KHR-2HV's knees have been re-architected for a more stable low pose which probably helps in Robo-One combat situation.