Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Gyro instructions

KHR-1, KHR-2HV, KHR-3HV, ICS servos, RCB controllers and other Kondo products
4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1

Gyro instructions

Post by Trebor » Sat May 27, 2006 12:40 am

Post by Trebor
Sat May 27, 2006 12:40 am

Hello,

I purchased a gyro from RoboSavvy a few months ago. I am not sure how it works or how to connect it. This site has great instructions on building Kondo but I do not see anything in english that shows how to connect and program the Gyro. Any links or information would be helpful.
Hello,

I purchased a gyro from RoboSavvy a few months ago. I am not sure how it works or how to connect it. This site has great instructions on building Kondo but I do not see anything in english that shows how to connect and program the Gyro. Any links or information would be helpful.
Trebor
Robot Builder
Robot Builder
User avatar
Posts: 14
Joined: Wed Feb 01, 2006 1:00 am
Top

Post by limor » Sat May 27, 2006 1:26 am

Post by limor
Sat May 27, 2006 1:26 am

Hi Trebor,
Have you checked out the translated document at the bottom of the "Documentation" page site's tree on the left (link)?
There were also some past discussions on the forum regarding the gyro. Here's one example: http://robosavvy.com/Forums&file=viewtopic&t=40

8)
Hi Trebor,
Have you checked out the translated document at the bottom of the "Documentation" page site's tree on the left (link)?
There were also some past discussions on the forum regarding the gyro. Here's one example: http://robosavvy.com/Forums&file=viewtopic&t=40

8)
limor
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 1845
Joined: Mon Oct 11, 2004 1:00 am
Location: London, UK
Top

Post by Trebor » Sat May 27, 2006 1:46 am

Post by Trebor
Sat May 27, 2006 1:46 am

Thanks, I haven't explored all the different locations of this forum. I looked for an obvious location but that one did not catch my attention.
Thanks, I haven't explored all the different locations of this forum. I looked for an obvious location but that one did not catch my attention.
Trebor
Robot Builder
Robot Builder
User avatar
Posts: 14
Joined: Wed Feb 01, 2006 1:00 am
Top

Post by se7en » Sun May 28, 2006 4:00 pm

Post by se7en
Sun May 28, 2006 4:00 pm

Don't forget about this link:

http://robosavvy.com/modules.php?name=F ... topic&t=70
Don't forget about this link:

http://robosavvy.com/modules.php?name=F ... topic&t=70
se7en
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 53
Joined: Mon Jun 13, 2005 1:00 am
Top

4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1
Return to KHR-1, KHR-2HV, KHR3-HV & Kondo