help me out　ｔｈis problem ab

[gogkub]

i do everything in the manual but there is motor id 6 on the right side is wrecked . so i change it with motor id0(head) and the result is , the motor id 1, 6 ,10 in the left side and id 1 ,0(replaced with id6) , 10 in the right side do not work . My teacher told me that u must change the ID of former motor id6 to be id0(how to change the motor id in heart to heart 4) in right side because six motors are linked together(so if want to make they can work all u must change the motor id - my teacher comment*) .

thank you in advance

[chrisvo]

You can't really change it in HTH4. At least, I don't think you can.

Here are instructions:

1. Download this program:
http://www.ixs.co.jp/download/data/dist ... 4_IDWR.exe
It's in Japanese, but it is a pretty simple program.

2. Now, unplug every servo from the RCB-4 unit. Plug only the servo that you want to change the ID for, into the first servo port of the RCB-4.

3. Run RCB4_IDWR.exe.

4. Make your setting change, then push the download button to commit the change to the servo.

Here's some more instructions:

(English)
http://www.ixs.co.jp/download/data/dist ... _IDW01.pdf

(Japanese)
http://www.ixs.co.jp/download/data/dist ... manual.pdf

[gogkub]

thank for ur help very much chrisvo ^^