Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Robonova-1 Charging Adapter Cable

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1

Robonova-1 Charging Adapter Cable

Post by Gort » Wed Feb 21, 2007 6:45 pm

Post by Gort
Wed Feb 21, 2007 6:45 pm

If you are still using the original battery for your robonova you need to get this http://www.lynxmotion.com/Product.aspx?productID=568&CategoryID=91 and an extra battery. That way you will always have a charged battery on hand. :D I am still hoping that the Robonova wireless controller will also go on sell in the US :cry:
If you are still using the original battery for your robonova you need to get this http://www.lynxmotion.com/Product.aspx?productID=568&CategoryID=91 and an extra battery. That way you will always have a charged battery on hand. :D I am still hoping that the Robonova wireless controller will also go on sell in the US :cry:
Gort
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 555
Joined: Wed May 31, 2006 1:00 am
Location: KC, MO, USA
Top

Post by engineer » Wed Feb 21, 2007 7:26 pm

Post by engineer
Wed Feb 21, 2007 7:26 pm

hi,gort, you can check out www.robotshop.ca for the bluetooth stuff. and to charge your extra battery just plug it into the batt input on your RN-1. these nimh batt hold a charge well and do not get memory like nicads, they just don't like trickle charging.
hi,gort, you can check out www.robotshop.ca for the bluetooth stuff. and to charge your extra battery just plug it into the batt input on your RN-1. these nimh batt hold a charge well and do not get memory like nicads, they just don't like trickle charging.
engineer
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 129
Joined: Wed Aug 09, 2006 1:00 am
Location: northern california
Top

2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1
Return to ROBONOVA-I & Hitec