Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

head blue led not working

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1

head blue led not working

Post by lezed » Sat Jul 19, 2008 4:35 pm

Post by lezed
Sat Jul 19, 2008 4:35 pm

Hi,
Just finished putting together my RN-1, started playing around with robobasic. After some initial problems with servo ports that were not allocated to the same pins as described in the manual, all is working fine, APART from the blue led in the head. Can't get it to light up (tried the code from battery monitor: OUT 52, 1) to no avail. LED works fine when tested separately.
Anybody got an idea?
Thanks
Hi,
Just finished putting together my RN-1, started playing around with robobasic. After some initial problems with servo ports that were not allocated to the same pins as described in the manual, all is working fine, APART from the blue led in the head. Can't get it to light up (tried the code from battery monitor: OUT 52, 1) to no avail. LED works fine when tested separately.
Anybody got an idea?
Thanks
lezed
Newbie
Newbie
Posts: 6
Joined: Sat Jul 19, 2008 4:27 pm
Top

LED

Post by engineer » Tue Jul 22, 2008 3:09 am

Post by engineer
Tue Jul 22, 2008 3:09 am

have you uncommented ' the voltage formula?
have you uncommented ' the voltage formula?
engineer
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 129
Joined: Wed Aug 09, 2006 1:00 am
Location: northern california
Top

Post by lezed » Tue Jul 22, 2008 9:58 pm

Post by lezed
Tue Jul 22, 2008 9:58 pm

Thanks for reply,
Yes I have uncommented the voltage code.
As I understand it, a routine such as:

OUT 52, 1
delay 400
OUT 52, 0
delay 400

Should turn the led on and off.
No big deal, just puzzling...
Thanks for reply,
Yes I have uncommented the voltage code.
As I understand it, a routine such as:

OUT 52, 1
delay 400
OUT 52, 0
delay 400

Should turn the led on and off.
No big deal, just puzzling...
lezed
Newbie
Newbie
Posts: 6
Joined: Sat Jul 19, 2008 4:27 pm
Top

head blue led not working

Post by viper1 » Thu Nov 27, 2008 1:15 am

Post by viper1
Thu Nov 27, 2008 1:15 am

I've noticed in a few past videos and u tube vids that some RN1's are using multi colored leds in the head. How are these wired and what code is used to turn on/off the different colors. I would like to use red for aggressives moves and green or blue for calm ones. I have the QV606 sound module in mine and it would be really cool to implement the led for added attitude.
I've noticed in a few past videos and u tube vids that some RN1's are using multi colored leds in the head. How are these wired and what code is used to turn on/off the different colors. I would like to use red for aggressives moves and green or blue for calm ones. I have the QV606 sound module in mine and it would be really cool to implement the led for added attitude.
viper1
Savvy Roboteer
Savvy Roboteer
Posts: 37
Joined: Thu May 10, 2007 2:55 pm
Top

4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1
Return to ROBONOVA-I & Hitec