Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

RN1 Newbie, stuck already.

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1

RN1 Newbie, stuck already.

Post by Ric » Wed Aug 02, 2006 6:50 pm

Post by Ric
Wed Aug 02, 2006 6:50 pm

Hi
I've recently completed a Robonova-1 from kit-form. No thanks to the manual. I'd like to register with Hitec but can't find my serial number. I'd be grateful of directions.
Thanks
Ric[/b]
Hi
I've recently completed a Robonova-1 from kit-form. No thanks to the manual. I'd like to register with Hitec but can't find my serial number. I'd be grateful of directions.
Thanks
Ric[/b]
Ric
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 57
Joined: Wed Aug 02, 2006 1:00 am
Location: Sunny Algarve, Portugal
Top

Post by Pev » Wed Aug 02, 2006 7:38 pm

Post by Pev
Wed Aug 02, 2006 7:38 pm

Firstly welcome to the world of RN-1.

On the serial number front I found what I believe is the serial number on a label on the bottom end of the coloured RoboNova box. I used the 5 digit number under the single barcode on the left of the label.

Hope this helps

Pev
Firstly welcome to the world of RN-1.

On the serial number front I found what I believe is the serial number on a label on the bottom end of the coloured RoboNova box. I used the 5 digit number under the single barcode on the left of the label.

Hope this helps

Pev
Carl
-------------------------
www.alt-view.co.uk
Pev
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 547
Joined: Sun Feb 26, 2006 1:00 am
Location: UK
Top

Post by CaptKill4Fun » Thu Aug 03, 2006 1:14 am

Post by CaptKill4Fun
Thu Aug 03, 2006 1:14 am

...
...
Last edited by CaptKill4Fun on Sun Aug 06, 2006 7:12 am, edited 1 time in total.
CaptKill4Fun
Savvy Roboteer
Savvy Roboteer
Posts: 100
Joined: Sat May 27, 2006 1:00 am
Location: Tucson
Top

Post by Ric » Thu Aug 03, 2006 8:43 am

Post by Ric
Thu Aug 03, 2006 8:43 am

I've got a 77008
Mind you I'm now struggling finding where on the site to register. I was there once before when I got stuck over the serial no. part, but now I can't find the registration page again. Is it me?
Incidentally after a lot of falling over backwards I finally got mine to do a complete sideways cartwheel last evening. I thought I'd probably made a mistake on assembly but it was the zero configuration that needed 'tweaking'. The manual explains it poorly, onve again it was the RoboSavvy site (assembly/testing) that explained it properly.
Thanks
Ric
I've got a 77008
Mind you I'm now struggling finding where on the site to register. I was there once before when I got stuck over the serial no. part, but now I can't find the registration page again. Is it me?
Incidentally after a lot of falling over backwards I finally got mine to do a complete sideways cartwheel last evening. I thought I'd probably made a mistake on assembly but it was the zero configuration that needed 'tweaking'. The manual explains it poorly, onve again it was the RoboSavvy site (assembly/testing) that explained it properly.
Thanks
Ric
Ric
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 57
Joined: Wed Aug 02, 2006 1:00 am
Location: Sunny Algarve, Portugal
Top

4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1
Return to ROBONOVA-I & Hitec