Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

AX12 LED - is it blinking or not?

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1

AX12 LED - is it blinking or not?

Post by Gadgetguy » Wed Mar 14, 2007 5:11 pm

Post by Gadgetguy
Wed Mar 14, 2007 5:11 pm

Hello all,

I think (based on the manual and various forum entries) that the AX12 LED should blink when the CM5 is switched on.

Is this correct?

I have tried several AX12's and none blinked... but they worked otherwise fine.

Do I have a defective kit? Or am I mistaken related to the blinking?

Any comment would be welcome...
Hello all,

I think (based on the manual and various forum entries) that the AX12 LED should blink when the CM5 is switched on.

Is this correct?

I have tried several AX12's and none blinked... but they worked otherwise fine.

Do I have a defective kit? Or am I mistaken related to the blinking?

Any comment would be welcome...
Gadgetguy
Robot Builder
Robot Builder
User avatar
Posts: 8
Joined: Wed Nov 08, 2006 1:00 am
Location: Oakville, ON, Canada
Top

Post by JonHylands » Wed Mar 14, 2007 5:41 pm

Post by JonHylands
Wed Mar 14, 2007 5:41 pm

The AX-12 will blink once, for about 1/2 a second, when power is applied.

- Jon
The AX-12 will blink once, for about 1/2 a second, when power is applied.

- Jon
JonHylands
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 512
Joined: Thu Nov 09, 2006 1:00 am
Location: Ontario, Canada
Top

2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1
Return to Bioloid & Robotis