A Newbee's Tail
A Newbee's Tail
by Will
Wed May 02, 2007 7:13 am
Hi from Will, seeking advice.
when i plug my power cable into bioloid and switch him on the onoff light flashes once along with all motors, then no other lights light up or flash. if i press u there are no led flashes or beeps.if i push the mode button the onoff led flashes once
if i click Behavior control programmer, then robot twitches.which would indercate enough power to move body and a responce from the activation.
if i click motion control then robot twitches but says cannot connect to cm-5
although if i open robot terminal and press the # key i get a list of stuff like
example 1 scanning for dynamixles (0-9).--hit any key to continue
and so on and so on.
at certain points robot moves around which to me says he is being effected by the pc and he has some battery power.
I do recomend to myself advice for last week, less button pushing trial and error, not charging the batter correctly, leaving the powercable in round the clock, and more time reading and going step by step.
My Newbee Tail. i got to tell the story at work about how by my self i stood proudly next to my robot looking out at the audiance which was not there and decleared "here before you today one of the most fantastic marvils of modern technollogy ", i pause momentarily," the humanoid robot" and i pushed the button. my eye's wide and grinning as the robot moved its arms quickly curling them to its chest like it was having a heart attack, hunching up and buckling at the knees it dropped to the floor, stone dead. oh no hang on its still movein, and with one leg a few decreasing kicks it was all over.
well the boys at work laughed at my story so that was good.
, success sounds nice.
Please advice me as my robot looks sad, ok he looks good and i look sad, please advice needed.
Thank you bye for now and be well from Will.
If i interprit the silence then there the most likely outcome of the subject is posibility is the answer, posibly.
and progression allows for vairation and me being a newbee.
Thank you, to Robosavvy for letting me post, Good fun.
i'll ask Mr Data to perform the Newbee's Tail when he's up and about.
Bye for now and be well from Will.
when i plug my power cable into bioloid and switch him on the onoff light flashes once along with all motors, then no other lights light up or flash. if i press u there are no led flashes or beeps.if i push the mode button the onoff led flashes once
if i click Behavior control programmer, then robot twitches.which would indercate enough power to move body and a responce from the activation.
if i click motion control then robot twitches but says cannot connect to cm-5
although if i open robot terminal and press the # key i get a list of stuff like
example 1 scanning for dynamixles (0-9).--hit any key to continue
and so on and so on.
at certain points robot moves around which to me says he is being effected by the pc and he has some battery power.
I do recomend to myself advice for last week, less button pushing trial and error, not charging the batter correctly, leaving the powercable in round the clock, and more time reading and going step by step.
My Newbee Tail. i got to tell the story at work about how by my self i stood proudly next to my robot looking out at the audiance which was not there and decleared "here before you today one of the most fantastic marvils of modern technollogy ", i pause momentarily," the humanoid robot" and i pushed the button. my eye's wide and grinning as the robot moved its arms quickly curling them to its chest like it was having a heart attack, hunching up and buckling at the knees it dropped to the floor, stone dead. oh no hang on its still movein, and with one leg a few decreasing kicks it was all over.
well the boys at work laughed at my story so that was good.
, success sounds nice.
Please advice me as my robot looks sad, ok he looks good and i look sad, please advice needed.
Thank you bye for now and be well from Will.
If i interprit the silence then there the most likely outcome of the subject is posibility is the answer, posibly.
and progression allows for vairation and me being a newbee.
Thank you, to Robosavvy for letting me post, Good fun.
i'll ask Mr Data to perform the Newbee's Tail when he's up and about.
Bye for now and be well from Will.
