Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Exspansion Board

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
6 posts • Page 1 of 1
Post a reply
6 posts • Page 1 of 1

Exspansion Board

Post by ttuuz » Tue Feb 18, 2014 8:02 pm

Post by ttuuz
Tue Feb 18, 2014 8:02 pm

Hi all just finished building my first ever pcb board a version of Dewes and Peppers board i built it on a bread board first had a few problems with the software that was writen for them i but got round them after a while it was my first time programing a in avr on an atmega8 once i had it working i used the free program from RS Design Spark to draw up the pcb board and the board came last week i have soldered all the parts on and its working great and heres a picture of it.
Hi all just finished building my first ever pcb board a version of Dewes and Peppers board i built it on a bread board first had a few problems with the software that was writen for them i but got round them after a while it was my first time programing a in avr on an atmega8 once i had it working i used the free program from RS Design Spark to draw up the pcb board and the board came last week i have soldered all the parts on and its working great and heres a picture of it.
Attachments
P1010059.JPG
P1010059.JPG (626.43 KiB) Viewed 13182 times
ttuuz
Robot Builder
Robot Builder
Posts: 13
Joined: Sun Jun 30, 2013 1:02 pm
Top

Re: Exspansion Board

Post by ttuuz » Tue Feb 18, 2014 8:15 pm

Post by ttuuz
Tue Feb 18, 2014 8:15 pm

And heres the bread board version a right birds nest lol.

Cheers
Ray.
And heres the bread board version a right birds nest lol.

Cheers
Ray.
Attachments
P1010060.JPG
P1010060.JPG (644.71 KiB) Viewed 13181 times
ttuuz
Robot Builder
Robot Builder
Posts: 13
Joined: Sun Jun 30, 2013 1:02 pm
Top

Re: Exspansion Board

Post by xevel » Thu Mar 27, 2014 12:55 am

Post by xevel
Thu Mar 27, 2014 12:55 am

Hey ttuuz,
Funnily enough I saw your board not too long ago, when I was working on mine. I could not find the other board you were referring too though, could you provide a link?

Is your work and/or the board you started from open sourced?
Hey ttuuz,
Funnily enough I saw your board not too long ago, when I was working on mine. I could not find the other board you were referring too though, could you provide a link?

Is your work and/or the board you started from open sourced?
xevel
Savvy Roboteer
Savvy Roboteer
Posts: 74
Joined: Sun Mar 27, 2011 6:37 pm
Top

Re: Exspansion Board

Post by ttuuz » Thu Mar 27, 2014 2:14 pm

Post by ttuuz
Thu Mar 27, 2014 2:14 pm

Hi heres the link to the page on here for the Dewy virsion of the board viewtopic.php?t=1487

Cheers Ray.
Hi heres the link to the page on here for the Dewy virsion of the board viewtopic.php?t=1487

Cheers Ray.
ttuuz
Robot Builder
Robot Builder
Posts: 13
Joined: Sun Jun 30, 2013 1:02 pm
Top

Re: Exspansion Board

Post by ttuuz » Thu Mar 27, 2014 2:34 pm

Post by ttuuz
Thu Mar 27, 2014 2:34 pm

Hi heres a picture off two of my boards installed in two feet i printed out on my 3d printer with 1 heel sensor and 2 toe sensore on each foot for feet leveling still testing them out lol.

Cheers Ray.
Hi heres a picture off two of my boards installed in two feet i printed out on my 3d printer with 1 heel sensor and 2 toe sensore on each foot for feet leveling still testing them out lol.

Cheers Ray.
Attachments
P1010061.JPG
P1010061.JPG (652.8 KiB) Viewed 12737 times
ttuuz
Robot Builder
Robot Builder
Posts: 13
Joined: Sun Jun 30, 2013 1:02 pm
Top

Re: Exspansion Board

Post by xevel » Thu Mar 27, 2014 2:58 pm

Post by xevel
Thu Mar 27, 2014 2:58 pm

Thanks for the link.

It's looking nice in the feet of your bot!
Thanks for the link.

It's looking nice in the feet of your bot!
xevel
Savvy Roboteer
Savvy Roboteer
Posts: 74
Joined: Sun Mar 27, 2011 6:37 pm
Top

6 posts • Page 1 of 1
Post a reply
6 posts • Page 1 of 1
Return to Bioloid & Robotis