Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

General I/O Module - Any Interest?

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
17 postsPage 2 of 21, 2
17 postsPage 2 of 21, 2

Post by JonHylands » Fri Jan 25, 2008 9:40 pm

Post by JonHylands
Fri Jan 25, 2008 9:40 pm

So, after a long wait, I finally got around to getting a small order of these boards done...

Image

http://robosavvy.com/Builders/JonHylands/SensorBoard-02.jpg

I have to do some work on the software, but you can expect to see these boards show up in my store in a couple weeks...

- Jon
So, after a long wait, I finally got around to getting a small order of these boards done...

Image

http://robosavvy.com/Builders/JonHylands/SensorBoard-02.jpg

I have to do some work on the software, but you can expect to see these boards show up in my store in a couple weeks...

- Jon
JonHylands
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 512
Joined: Thu Nov 09, 2006 1:00 am
Location: Ontario, Canada

Post by JonHylands » Mon Jan 28, 2008 9:15 pm

Post by JonHylands
Mon Jan 28, 2008 9:15 pm

Okay, I've set up the wiki page for this:

http://www.bioloid.info/tiki/tiki-index ... l+IO+Board

If you have any comments on the documentation, or features that are missing, please let me know...

- Jon

Image
Okay, I've set up the wiki page for this:

http://www.bioloid.info/tiki/tiki-index ... l+IO+Board

If you have any comments on the documentation, or features that are missing, please let me know...

- Jon

Image
JonHylands
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 512
Joined: Thu Nov 09, 2006 1:00 am
Location: Ontario, Canada

Previous
17 postsPage 2 of 21, 2
17 postsPage 2 of 21, 2