Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

How tall is the Bioloid?

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
5 posts • Page 1 of 1
Post a reply
5 posts • Page 1 of 1

How tall is the Bioloid?

Post by evaderdjo » Sat Sep 01, 2007 3:46 am

Post by evaderdjo
Sat Sep 01, 2007 3:46 am

I am comparing robots to see which might be better equipped for a sumo match. All of the other manufacturers show their robot's height and weight, but I can't find either for the Bioloid. I guess since the Bioloid can be changed into other configurations, the height and weight depend on how you build it.

For the standard configuration humanoid Bioloid, as described in the instruction manual (no extra DOF, or extra sensor servos), how tall is the Bioloid and how much does it weigh?
I am comparing robots to see which might be better equipped for a sumo match. All of the other manufacturers show their robot's height and weight, but I can't find either for the Bioloid. I guess since the Bioloid can be changed into other configurations, the height and weight depend on how you build it.

For the standard configuration humanoid Bioloid, as described in the instruction manual (no extra DOF, or extra sensor servos), how tall is the Bioloid and how much does it weigh?
evaderdjo
Savvy Roboteer
Savvy Roboteer
Posts: 42
Joined: Sun Aug 12, 2007 10:43 pm
Top

Post by Droid Works » Sat Sep 01, 2007 4:04 am

Post by Droid Works
Sat Sep 01, 2007 4:04 am

Height: 13.4" I'm not sure what the weight is as it comes as a multiple project kit.
Height: 13.4" I'm not sure what the weight is as it comes as a multiple project kit.
Droid Works
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 185
Joined: Fri Aug 24, 2007 1:01 am
Location: Syracuse NY
Top

Post by evaderdjo » Sun Sep 02, 2007 9:44 pm

Post by evaderdjo
Sun Sep 02, 2007 9:44 pm

I'm looking for the weight of the standard humanoid build described in the instruction manual.
I'm looking for the weight of the standard humanoid build described in the instruction manual.
evaderdjo
Savvy Roboteer
Savvy Roboteer
Posts: 42
Joined: Sun Aug 12, 2007 10:43 pm
Top

Post by limor » Sun Sep 02, 2007 10:27 pm

Post by limor
Sun Sep 02, 2007 10:27 pm

check out RoboSavvy Bioloid Wiki : http://robosavvy.com/site/index.php?opt ... is_bioloid
look for the link to system-identification project. the site has all physical properties of the Bioloid humanoid model
check out RoboSavvy Bioloid Wiki : http://robosavvy.com/site/index.php?opt ... is_bioloid
look for the link to system-identification project. the site has all physical properties of the Bioloid humanoid model
limor
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 1845
Joined: Mon Oct 11, 2004 1:00 am
Location: London, UK
Top

Post by cdraptor » Mon Sep 03, 2007 1:45 am

Post by cdraptor
Mon Sep 03, 2007 1:45 am

Well I saw on http://humanoids.dem.ist.utl.pt/Iden_external/gymn_fullbody.html

the Bioloid is 1926g / 4.25 lbs. The Futaba RBT-1 is a lightweight compared to him 900g / 1.98 lbs
Well I saw on http://humanoids.dem.ist.utl.pt/Iden_external/gymn_fullbody.html

the Bioloid is 1926g / 4.25 lbs. The Futaba RBT-1 is a lightweight compared to him 900g / 1.98 lbs
cdraptor
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 93
Joined: Tue Apr 03, 2007 2:49 am
Location: Lititz, PA
Top

5 posts • Page 1 of 1
Post a reply
5 posts • Page 1 of 1
Return to Bioloid & Robotis