Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

My Play button on the Cm-5 doesn't work!

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
5 posts • Page 1 of 1
Post a reply
5 posts • Page 1 of 1

My Play button on the Cm-5 doesn't work!

Post by Hello31 » Sun Sep 02, 2007 9:37 pm

Post by Hello31
Sun Sep 02, 2007 9:37 pm

Well my play button on the CM-5 Doesn't work i dont know why so can anyone help me cause i cant make it move or anything when the button isn't working >.< so help me!!![/u]
Well my play button on the CM-5 Doesn't work i dont know why so can anyone help me cause i cant make it move or anything when the button isn't working >.< so help me!!![/u]
Hello31
Robot Builder
Robot Builder
Posts: 12
Joined: Tue Aug 14, 2007 7:40 pm
Top

Re: My Play button on the Cm-5 doesn't work!

Post by Hello31 » Tue Sep 04, 2007 2:35 pm

Post by Hello31
Tue Sep 04, 2007 2:35 pm

Ok sorry i did't tell u that much about the problem.
Well my CM-5 Isn't broken or anything its just that when i press mode down to the play thingy and then i press start but the play button still blinks and when i press the start when its blinking at the play button the TXD and AUX blinks for 1 sec and then it stops... so i dunno whats the problem maby i should reset the CM-5 But how do i do that!!
Ok sorry i did't tell u that much about the problem.
Well my CM-5 Isn't broken or anything its just that when i press mode down to the play thingy and then i press start but the play button still blinks and when i press the start when its blinking at the play button the TXD and AUX blinks for 1 sec and then it stops... so i dunno whats the problem maby i should reset the CM-5 But how do i do that!!
Hello31
Robot Builder
Robot Builder
Posts: 12
Joined: Tue Aug 14, 2007 7:40 pm
Top

Post by siempre.aprendiendo » Tue Sep 04, 2007 8:44 pm

Post by siempre.aprendiendo
Tue Sep 04, 2007 8:44 pm

Have you tried with several BCP programs? May be the problem is the program that you are testing ...
Have you tried with several BCP programs? May be the problem is the program that you are testing ...
siempre.aprendiendo
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 559
Joined: Wed Aug 08, 2007 9:13 pm
Location: Barcelona
Top

Post by Hello31 » Tue Sep 04, 2007 9:24 pm

Post by Hello31
Tue Sep 04, 2007 9:24 pm

Well i dont even know how to use any of those programs so someone gotta tell me the basics so my bioloid can move (Humanoid)!
Well i dont even know how to use any of those programs so someone gotta tell me the basics so my bioloid can move (Humanoid)!
Hello31
Robot Builder
Robot Builder
Posts: 12
Joined: Tue Aug 14, 2007 7:40 pm
Top

hi

Post by ryann2k1 » Wed Sep 05, 2007 1:41 am

Post by ryann2k1
Wed Sep 05, 2007 1:41 am

I built my Bioloid based on the manual. I think you should follow the manual exactly. If you have tried to follow the manual and it is not working, then I will be very happy to help you. you may send me a pm if you need. :D
ps. what Bioloid kit do you have?

cheers,

ryann2k1
I built my Bioloid based on the manual. I think you should follow the manual exactly. If you have tried to follow the manual and it is not working, then I will be very happy to help you. you may send me a pm if you need. :D
ps. what Bioloid kit do you have?

cheers,

ryann2k1
ryann2k1
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 154
Joined: Thu Nov 16, 2006 1:00 am
Top

5 posts • Page 1 of 1
Post a reply
5 posts • Page 1 of 1
Return to Bioloid & Robotis