Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

AX12 - Dissection

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1

AX12 - Dissection

Post by BillB » Mon Oct 15, 2007 10:31 pm

Post by BillB
Mon Oct 15, 2007 10:31 pm

After accidently breaking 2 of my AX12 servos (one had a broken tooth, the other had electronic problem) I decided to cannibalise parts from each to make a new working AX12 servo.

For those of you who are interested here is a photo of one of the AX12 servos that has been dissected:

Image

Note: This is a disected AX12 servo not the newer AX12+ servos.
After accidently breaking 2 of my AX12 servos (one had a broken tooth, the other had electronic problem) I decided to cannibalise parts from each to make a new working AX12 servo.

For those of you who are interested here is a photo of one of the AX12 servos that has been dissected:

Image

Note: This is a disected AX12 servo not the newer AX12+ servos.
BillB
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 232
Joined: Sun Aug 06, 2006 1:00 am
Location: Hampshire, UK
Top

Post by NewBreedWarrior » Fri Oct 19, 2007 3:08 pm

Post by NewBreedWarrior
Fri Oct 19, 2007 3:08 pm

The actual motor looks like a simple core brush type? any chance of an upgrade?
The actual motor looks like a simple core brush type? any chance of an upgrade?
In the fell clutch of circumstance
I have not winced nor cried aloud.
Under the bludgeonings of chance
My head is bloody, but unbowed.
NewBreedWarrior
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 53
Joined: Fri Jul 28, 2006 1:00 am
Location: United States, Kentucky
Top

2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1
Return to Bioloid & Robotis