Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

CM-510 Controller Issues

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
6 posts • Page 1 of 1
Post a reply
6 posts • Page 1 of 1

CM-510 Controller Issues

Post by marcdimmick » Thu Dec 31, 2009 4:59 am

Post by marcdimmick
Thu Dec 31, 2009 4:59 am

I am working with the Premium Kit and looking to find anyone else who has started to work with the CM-510 controller.

I am having really big issues in getting connected to the CM-510. I am using windows7 and have tried XP mode as well with no luck. Any suggestions from people actually using the CM-510
I am working with the Premium Kit and looking to find anyone else who has started to work with the CM-510 controller.

I am having really big issues in getting connected to the CM-510. I am using windows7 and have tried XP mode as well with no luck. Any suggestions from people actually using the CM-510
marcdimmick
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Wed Oct 28, 2009 6:35 am
Top

Post by PedroR » Fri Jan 15, 2010 11:42 am

Post by PedroR
Fri Jan 15, 2010 11:42 am

fyi

marcdimmic has postedthesolution to his problem here http://robosavvy.com/forum/viewtopic.php?t=5619
fyi

marcdimmic has postedthesolution to his problem here http://robosavvy.com/forum/viewtopic.php?t=5619
PedroR
Savvy Roboteer
Savvy Roboteer
Posts: 1199
Joined: Mon Jun 16, 2008 11:07 pm
Top

Symptom?

Post by UncleBob » Fri Jan 15, 2010 12:23 pm

Post by UncleBob
Fri Jan 15, 2010 12:23 pm

I just solved mine as you know. What symptom, error message, screenshots?
I just solved mine as you know. What symptom, error message, screenshots?
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

Cm510

Post by UncleBob » Sat Jan 23, 2010 3:56 am

Post by UncleBob
Sat Jan 23, 2010 3:56 am

Got another cm510 from distributor. Also cannot connect to it any longer. Also tried the vista. No good.
Got another cm510 from distributor. Also cannot connect to it any longer. Also tried the vista. No good.
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

Post by Fritzoid » Mon Jan 25, 2010 12:28 pm

Post by Fritzoid
Mon Jan 25, 2010 12:28 pm

Jez guys this is getting ugly!

My Bioloid Premium works great!

My configuration is:

Sony VIAO laptop
Windows XP (home)
Keyspan USB to serial dongle
Free Serial Port Monitor v3.3

You guys should also try to get access to an XP system, preferrably one with a "real" serial port (good luck with that part).

I just bought a Windows 7 desktop system, so I will try running RoboPlus on that for comparison.
Jez guys this is getting ugly!

My Bioloid Premium works great!

My configuration is:

Sony VIAO laptop
Windows XP (home)
Keyspan USB to serial dongle
Free Serial Port Monitor v3.3

You guys should also try to get access to an XP system, preferrably one with a "real" serial port (good luck with that part).

I just bought a Windows 7 desktop system, so I will try running RoboPlus on that for comparison.
Fritzoid
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 331
Joined: Mon Dec 18, 2006 1:00 am
Top

Mine is all working fine now

Post by marcdimmick » Mon Jan 25, 2010 3:49 pm

Post by marcdimmick
Mon Jan 25, 2010 3:49 pm

Hi Fritzoid,
I got mine all working with Windows 7 and all is good. I needed to do the reset of the firmware which I have posted on this forum and it has been working since as well as the remote.

Marc
Hi Fritzoid,
I got mine all working with Windows 7 and all is good. I needed to do the reset of the firmware which I have posted on this forum and it has been working since as well as the remote.

Marc
marcdimmick
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Wed Oct 28, 2009 6:35 am
Top

6 posts • Page 1 of 1
Post a reply
6 posts • Page 1 of 1
Return to Bioloid & Robotis