Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Bioliod Help

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
7 posts • Page 1 of 1
Post a reply
7 posts • Page 1 of 1

Bioliod Help

Post by UncleBob » Fri Jan 15, 2010 6:30 am

Post by UncleBob
Fri Jan 15, 2010 6:30 am

Just finish building the bioliod premium. The posture is correct. But I cannot command it using the infrared remote. I install roboplus 1.0.15 in Bootcamp. It setups the port to com3 but roboplus cannot work.

Here is a video of what happens

phpBB [media]

Please help!! Thanks!!
Just finish building the bioliod premium. The posture is correct. But I cannot command it using the infrared remote. I install roboplus 1.0.15 in Bootcamp. It setups the port to com3 but roboplus cannot work.

Here is a video of what happens

phpBB [media]

Please help!! Thanks!!
Last edited by UncleBob on Fri Jan 15, 2010 8:49 am, edited 1 time in total.
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

I had the same problem and was given the fix

Post by marcdimmick » Fri Jan 15, 2010 7:22 am

Post by marcdimmick
Fri Jan 15, 2010 7:22 am

Hi,
I had the same problem and I sent my CM-510, cable and USB device back and then they have since emailed the solution. It looks like you will need to do a firmware refresh. Check out my last posting on this site or go to my website http://www.robotusersaustralia.com/ click on Bioloid and then you will see the link for the process to refresh firmware.
Hi,
I had the same problem and I sent my CM-510, cable and USB device back and then they have since emailed the solution. It looks like you will need to do a firmware refresh. Check out my last posting on this site or go to my website http://www.robotusersaustralia.com/ click on Bioloid and then you will see the link for the process to refresh firmware.
marcdimmick
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Wed Oct 28, 2009 6:35 am
Top

Got it

Post by UncleBob » Fri Jan 15, 2010 7:25 am

Post by UncleBob
Fri Jan 15, 2010 7:25 am

I flip the switch at the side of the USB2Dynamic dongle from TTL to RS232 and now I can control via notebook. Then the RoboPlus manager updated my firmware.

Still don't know if remote works or not.
I flip the switch at the side of the USB2Dynamic dongle from TTL to RS232 and now I can control via notebook. Then the RoboPlus manager updated my firmware.

Still don't know if remote works or not.
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

Test Motion Vid

Post by UncleBob » Fri Jan 15, 2010 8:04 am

Post by UncleBob
Fri Jan 15, 2010 8:04 am

phpBB [media]
phpBB [media]
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

Remote also works with combination of keys.

Post by marcdimmick » Fri Jan 15, 2010 8:24 am

Post by marcdimmick
Fri Jan 15, 2010 8:24 am

The other part is to press the left button first then press the play button and the lights should go green. I don't believe it will work while you have the red.
The other part is to press the left button first then press the play button and the lights should go green. I don't believe it will work while you have the red.
marcdimmick
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Wed Oct 28, 2009 6:35 am
Top

L button

Post by UncleBob » Fri Jan 15, 2010 8:51 am

Post by UncleBob
Fri Jan 15, 2010 8:51 am

Isn't R stand for remote?
Isn't R stand for remote?
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

Catch and play

Post by UncleBob » Fri Jan 15, 2010 9:16 am

Post by UncleBob
Fri Jan 15, 2010 9:16 am

Do can I set catch and play with roboplus?
Do can I set catch and play with roboplus?
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am
Top

7 posts • Page 1 of 1
Post a reply
7 posts • Page 1 of 1
Return to Bioloid & Robotis